Xerox WorkCentre 3615
Troubleshooting. Image Quality. IQ03 Random Spots
Applicable Parts
• IIT Assembly, PL 6.1
• DADF Assembly, PL 6.1
• Transfer Roller Assembly, PL 3.4
• Drum Cartridge, PL 3.1
• Fusing Assembly, PL 3.5
• HVPS, PL 5.3
Troubleshooting Procedure
Note: for the Phaser 3610, begin the procedure at step 4.
| Step | Actions and Questions | Yes | No |
|---|---|---|---|
| 1 | Does the error occur only during copying? | Go to step 2. | Go to step 4. |
| 2 | Is the original clean? | Go to step 3. | Change the original. |
| 3 | Are there any damages or foreign substances to the Platen Glass and DADF Feed Rollers? | Remove the foreign substances or clean up the IIT/DADF. If the Platen Glass has been damaged, replace (REP 6.1 IIT Assembly), then go to step 5. | Go to step 5. |
| 4 | Print the Test Print Gradation ESS in diagnosis. (Service-Mode / Printer Diag / Test Print) Is the image printed correctly? | Troubleshooting complete. | Go to step 5. |
| 5 | Clean the inside the Printer. Is the image printed correctly? | Troubleshooting complete. | Go to step 6. |
| 6 | Ensure that the Toner Cartridge are installed correctly. Is the image printed correctly? | Troubleshooting complete. | Go to step 7. |
| 7 | Ensure that the Drum Cartridge are installed correctly. Is the image printed correctly? | Troubleshooting complete. | Go to step 8. |
| 8 | Is the Adjust Density setting darker 2 or 3? (Machine Status / Tools / Admin Settings / Service Tools) | Change the setting to Normal, then go to step 9. | Go to step 9. |
| 9 | Remove (REP 3.4 Transfer Roller Assembly). Are the Plate Spring BTR on the HVPS dirty or deformed? | Clean up the Plate Spring BTR or replace (REP 5.7 HVPS (3610) / REP 5.8 HVPS (3615)), then go to step 10. | Go to step 10. |
| 10 | Reseat (REP 3.4 Transfer Roller Assembly). Is the image printed correctly? | Troubleshooting complete. | Go to step 11. |
| 11 | Replace (REP 3.4 Transfer Roller Assembly). Is the image printed correctly | Troubleshooting complete. | Go to step 12. |
| 12 | Remove the Drum Cartridge. Are the Spring BCR and Spring DB on the HVPS dirty or deformed? | Clean up the Spring BCR and Spring DB or replace (REP 5.7 HVPS (3610) / REP 5.8 HVPS (3615)), then go to step 13. | Go to step 13. |
| 13 | Reseat the Drum Cartridge. Is the image printed correctly? | Troubleshooting complete. | Go to step 14. |
| 14 | Replace the Drum Cartridge. Is the image printed correctly? | Troubleshooting complete. | Go to step 15. |
| 15 | Replace (REP 3.5 Fusing Assembly). Is the image printed correctly? | Troubleshooting complete. | Replace (REP 5.7 HVPS (3610) / REP 5.8 HVPS (3615)). |