Xerox WorkCentre 3615
Service Mode. Sensor Test (Digital Output)
Checks whether the DI (digital input) components such as sensors and switches on the IOT are functioning properly.
Displays “0” when Sensor Test is started. This value is increased when the DI components are switched from OFF to ON, which is used for confirming that the component functions normally. Sensor Test targets all DI components.
Sensor Test Parameter Table
Chain | Link | Component |
---|---|---|
010 | 200 | Fusing Relay Enable |
010 | 201 | Fusing Fuse Open (invalid code) |
041 | 300 | Inter Lock Front Cover |
041 | 301 | Inter Lock Rear Cover |
042 | 200 | Rear Fan Alarm |
042 | 201 | LVPS Fan Alarm |
071 | 100 | MSI No Paper Sensor |
071 | 101 | Tray 1 No Paper Sensor [CST No Paper Sensor] |
071 | 102 | Regi Sensor |
071 | 103 | Exit Sensor |
071 | 116 | Option Feeder 1 No Paper Sensor [Tray 2 No Paper Sensor] |
071 | 117 | Option Feeder 2 No Paper Sensor [Tray 3 No Paper Sensor] |
071 | 118 | Option Feeder 3 No Paper Sensor [Tray 4 No Paper Sensor] |
071 | 119 | Option Feeder 1 Path Sensor [Tray 2 Path Sensor] |
071 | 120 | Option Feeder 2 Path Sensor [Tray 3 Path Sensor] |
071 | 121 | Option Feeder 3 Path Sensor [Tray 4 Path Sensor] |
071 | 122 | Full Stack Sensor |
071 | 200 | Option Feeder 1 Motor Alarm [(Tray 2)MOTOR ASSY OPTION] |
071 | 201 | Option Feeder 2 Motor Alarm [(Tray 3)MOTOR ASSY OPTION] |
071 | 202 | Option Feeder 3 Motor Alarm [(Tray 4)MOTOR ASSY OPTION] |