Xerox WorkCentre 3335

Enter Service Mode Phaser 3330

To enter Service Mode, press Menu, and then press the # Key, enter 1934 then press OK.

Service Mode Menu

The Service Mode menu consists of 6 high level menu items: Jobs, Information, Tray Management, Tray Paper Settings, Tools, and Troubleshooting.

Printer Information

• Firmware Version
• HFSI
• Usage Counters
• Billing Meters
• Performance Counters

Printer Routines

• DC 612
• DC 131 NVM RAM
• DC 132 NVM RAM Initialization
• DC 330 Component Control
• DC 305 UI Test

Other Routines

• Memory Clear
• Format SD
• Set Machine Serial Number

Log Backup

• Capture Log
• Off
• Level 1
• Level 2

Exit Diagnostics

• Yes/No

 

Enter Service Mode WorkCentre 3335/3345

To enter Service Mode, press and hold Log In, and then press the # Key, enter 1934 then press Start.

Service Mode Menu

The Service Mode menu consists of 5 high level menu items: General, Service Information, Copier Diagnostics, FAX & NetWorking (NW), and Log Backup.

General Information

• Serial Number:
• Images Since Last Call:
• System Software Version:
• IP Address:

Service Information

• dc104 Usage Counters
• dc108 Software Version
• dc109 Fax Protocol Report
• dc120 Fault Counters
• dc122 Fault History
• dc135 HFSI
• Supplies Report...

Copier Diagnostics

• dC131 NVM Read/Write
• dc132 NVM Initialization
• dc305 UI Test
• dc330 Component Control
• dc612 Print Test Pattern
• Format Hard Drive
• Memory Clear
• Shading Test
• Serial Number Reset

Fax & NW Diagnostics

• dc131 NVM Read/Write-Fax
• dc132 NVM Initialization-Fax
• dc330 Component Control-Fax
• dc132 NVM Initialization-Fax