Xerox WorkCentre 3225
Troubleshooting. Image Quality. IQ4 Spots RAP
Random or periodic dark areas in the low density areas of a print, or voids in the dark areas of a print.
Initial Actions
Ensure that the Imaging Unit is firmly seated.
Step | Procedure | Yes | No |
---|---|---|---|
1 | Check the Transfer Roller for wear, damage and remaining life. The Transfer Roller is OK. | 2 | Replace the Transfer Roller REP 1.16. |
2 | Clean the voltage terminals for the following components: • Charge Roller • Mag Roller Switch on the power and make a test print. The test print looks OK. |
3 | Replace the Toner Cartridge. (PL-XX). |
3 | If problem persists, replace the Fuser Module REP 1.17. |