Xerox WorkCentre 3225

Test Pattern pages are available for troubleshooting image quality defects and to confirm proper printer operation. Printing the Test Pattern is useful for stimulating asynchronous (dynamic) events related to the print process, or as a test for media path and media-related problems.

The test print provides a variety of different line styles in both process and cross-process directions. the pattern is used to check registration, dot size and image density.

Test Pattern 1 and Test Pattern 2 are essentially the same but for different media sizes. Table 2 describes the test patterns and the purpose for which they are used to identify image quality

To create a test print from the Control Panel:

1. Enter Diagnostic Mode.
   Press the <Menu> button, the <#> button,
   then using the keypad select <1934>,
   then press the <OK> button.
2. Select: [Diagnostics, Machine Test, Test Pattern, Print, Yes].
   Press the <OK> button after menu selections.
   • Test Pattern 1 for 8.5 x 11 prints.
   • Test Pattern 2 for A4 prints.