Xerox WorkCentre 3225

Service Mode. GP 7 Firmware Upgrade

This procedure is used to update the machine firmware. The firmware can be updated using the USB port or over the network.

Wired or wireless connection to upgrade using the network.
The usblist2.exe tool, located in the GSN website, installed on the PWS device.
Correct firmware file for update.
Firmware Upgrade must be enabled in the machine settings on the printer.
Any jobs in the printer queue must complete or be deleted before initiating a firmware upgrade.

Switch the power off.
Connect a USB cable from the PWS to the USB port on the printer.
Switch the power on. Confirm that the printer is the Ready status.
Drag the SWUPGRADE_ON.prn file and drop it onto usblist2.exe.
Drag and drop the firmware file onto usblist2.exe. The firmware update will start automatically.
Printer will reboot when upgrade is complete.

pen a web browser and enter the machine’s IP address.
Press <Enter>. The CentreWare Internet Services window will open.
Select the Login link at the top of the screen.
Enter the Administrator username (admin) and password (1111). The Firmware Upgrade window will open
Click on the Properties tab.
In the Security link, select System Security.
Select the Feature Management link in the directory tree.
Select the Firmware Upgrade Enable box.
Click Apply to save the changes.
Select the Support tab.
In the Firmware Upgrade link, select the Upgrade Wizard button.
a. In the Firmware File area, select Browse.
b. Locate and select the correct firmware upgrade .hd file.
c. Select Open
Select Next. The firmware will now be verified and display information about the upgrade.
Select Next to continue. The upgrade should take approximately 10 minutes.
The machine will reboot automatically when the upgrade has completed.
Print a Configuration Report and verify that the firmware has been successfully upgraded.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home