Xerox WorkCentre 3025BI
Diagnostic Mode. 1 Diagnostics Entry and Exit
Purpose
This procedure describes the following items:
- How to enter Diagnostics
- The Diagnostic screen
- How to exit Diagnostics
Procedure
Enter Diagnostics from the 3025NI model:
- Make sure the machine is in Ready mode.
- Enter the Diagnostic (Tech) Mode from the Control Panel. Press the following buttons in quick succession:
<Menu>#>1934>OK>. - In the Diagnostic Mode, use the navigation buttons to scroll to the desired sub-menu.
- Press the <OK> button to confirm menu selections.
Enter Diagnostics from the 3025BI model:
- Make sure the machine is in Ready mode.
- Enter the Diagnostic (Tech) Mode from the Control Panel. Press the following buttons in quick succession:
<Menu>Back>Up arrow>Down arrow>OK>Stop.
• Press the [Menu] button to access Diagnostics. - In the Diagnostic Mode, use the navigation buttons to scroll to the desired sub-menu.
- Press the <OK> button to confirm selections.
To exit Diagnostics:
- From the Diagnostics menu, use up and down arrows to scroll to <Exit Diagnostics>.
- Press the <OK> button.
Refer to Section 6, Diagnostics for a listing of available functions within Diagnostic Mode