-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Xerox WorkCentre 220
Troubleshooting. Fusing/Exit Misfeed
Detection Timing
Type |
Description |
Detection of paper left in Fusing Unit |
The paper unblocks the Exit Sensor when the Power Switch is turned ON, the Front Door is opened and closed, or when a misfeed occurs or transport of paper is stopped. |
Transport section |
The paper unblocks the Exit Sensor earlier than a predetermined period of time after the Paper Take-Up Switch has been actuated. |
The paper does not unblock the Exit Sensor even after the lapse of a predetermined period of time after the Paper Take-Up Switch has been actuated. |
Misfeed detected at the exit section |
The Exit Sensor is blocked earlier than a predetermined period of time after the Paper Take-Up Switch has been actuated. |
Relevant Electrical Parts
- Paper Take-Up Switch (S1)
- Exit Sensor (PS3)
- Controller/Mechanical Control Board (PWB-P)
Troubleshooting Procedures
Step |
Action |
Control Signal/ Location |
1 |
Initial check items |
|
2 |
S1 switch check |
PWB-P PJ10A-2/ 7-F |
3 |
PS3 sensor check |
PWB-P PJ8A-3/ 6-F |
4 |
Replace PWB-P. |
|