-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Xerox WorkCentre 220
Troubleshooting. Paper Take-Up/Transport Misfeed
Detection Timing
Type |
Description |
Misfeed detected at the paper take-up section |
The Paper Take-Up Switch is actuated earlier than a predetermined period of time after the paper take-up sequence has been started. |
Transport section |
The Paper Take-Up Switch is deactuated earlier than a predetermined period of time after it has been actuated. |
The Paper Take-Up Switch is not deactuated even after the lapse of a predetermined period of time after it has been actuated. |
Detection of paper left at the paper take-up section |
Transport of paper is stopped before the Paper Take-Up Switch is actuated after the paper take-up sequence has been started. |
Detection of paper left at the transport section |
The Paper Take-Up Switch is actuated when the Power Switch is turned ON, the Front Door is opened and closed, or when a misfeed occurs or transport of paper is stopped. |
Paper is present between the Paper Take-Up Switch and Exit Sensor when transport of paper is stopped. |
Relevant Electrical Parts
- Paper Take-Up Switch (S1)
- Exit Sensor (PS3)
- Paper Take-Up Solenoid (SL1)
- Controller/Mechanical Control Board (PWB-P)
Troubleshooting Procedures
Step |
Action |
Control Signal/ Location |
1 |
Initial check items |
|
2 |
SL1 operation check |
PWB-P PJ3A-2/ 4-F |
3 |
S1 switch check |
PWB-P PJ10A-2/ 7-F |
4 |
PS3 sensor check |
PWB-P PJ8A-3/ 6-F |
5 |
Replace PWB-P. |
|