Xerox Phaser 6600

Digital Input checks whether the digital input (DI) components function properly. The display shows [0] when the digital input test is started, and the value will be increased when the DI components are switched from OFF to ON, which is used for confirming that the component functions normally. The test targets all DI components.

Sensor Test Parameter Table

Chain	Link	Component
010	200	Fusing Relay Enable
010	201	Fusing Fuse Sensor
041	300	Interlock, Side Cover
041	301	Interlock, Rear Cover
041	302	Front Cover Sensor
042	200	LVPS Fan Alarm
071	100	Bypass Tray No Paper Sensor
071	101	Tray1 No Paper Sensor
071	102	Bypass Tray Detect Sensor
071	103	Regi Sensor
071	104	Exit Sensor
071	105	Full Stack Sensor
071	109	Option Feeder1 Size Sensor0
071	110	Option Feeder1 Size Sensor1
071	111	Option Feeder1 Size Sensor2
071	112	Option Feeder2 Size Sensor0 (not in use)
071	113	Option Feeder2 Size Sensor1 (not in use)
071	114	Option Feeder2 Size Sensor2 (not in use)
071	115	Option Feeder1 No Paper Sensor
071	116	Option Feeder2 No Paper Sensor (not in use)
071	117	Option Feeder1 Path Sensor
071	118	Option Feeder2 Path Sensor (not in use)
071	200	Main Motor Alarm
071	201	Paper Transport Motor Alarm
071	202	Option Feeder1 Motor Alarm
071	203	Option Feeder2 Motor Alarm (not in use)
093	200	Developer Motor Alarm
094	202	Waste Toner Box Full Sensor