Xerox Phaser 6510

Entering the Diagnostics on the MFP

NOTE: You must not be logged in as Administrator. Before entering Diagnostics, ensure you are logged out as Administrator.

1. Press and hold the Home button more than five seconds, then release.
2. Enter the Passcode (6789), and touch OK.
3. Touch Diagnostics.
   
4. Select the Diagnostics menu.
   

Exiting the Diagnostics on the MFP

1. Touch Exit and select Clear Error Log History or Keep Error Log History.
2. Touch Service.
3. Select Log Out and exit the Diagnostics.