Xerox Phaser 6010
Troubleshooting. Sensor Test Procedures. WorkCentre 6015 MFP
The following Digital Input procedures test each print engine sensor using Service Diagnostics. When a paper jam occurs, or an error message or code is displayed, execute these tests to isolate the problem.
- No Paper Sensor
- K Mode Sensor
- Exit Sensor
- Registration Sensor
- Interlock Switch (Cover Open Sensor)
- Y, M, C, K CRUM
Note
Pressing the Cancel button stops the sensor tests. Press the Back button to go back to the Engine Diag menu.
During the sensor tests, other diagnostic functions can not be performed simultaneously. The printer only accepts operations for the DI components and exit of the sensor tests. Parameters for the Digital Input tests are as shown in the following table.
DI-0 Fan Alarm ((internal signal)
DI-2 No Paper Sensor
DI-3 K Mode Sensor
DI-4 Exit Sensor
DI-5 Regi Sensor
DI-7 Interlock Switch
DI-8 CRUM Y
DI-9 CRUM M
DI-a CRUM C
DI-b CRUM K