Xerox Phaser 6000
Service Mode 01. Entering Service Diagnostics Mode
Entering Service Diagnostics Mode
For Phaser 6010N:
- Turn the printer Off.
- Press and hold the Up and Down arrows simultaneously and turn the printer On.
- Release the buttons when Service Mode and Password appear on the display.
- Press the Down Arrow twice, then press OK.
- Service Mode and ESS Diag appear on the display to indicate when diagnostics are active.
For WorkCentre 6015 MFP:
- Turn the printer Off.
- Press and hold the Up and Down Arrow simultaneously and turn the printer On.
- Release the buttons when CE Mode Please wait appears on the display.
- The diagnostics are ready when the display reads:
CE Mode
Printer
Fax/Scanner
MFG Settings
Exiting Service Diagnostics Mode
For Phaser 6010N:
- Scroll to Exit Mode, press OK.
- Press OK when Exit Mode Complete Exit is displayed.
- Press OK when Complete Exit Exit? is displayed.
For WorkCentre 6015 MFP:
- Scroll to Fax/Scanner > Complete > Exit Fax/Scanner Diag, and press OK.
- Press OK when Complete Exit? is displayed.