Xerox Phaser 3010
Troubleshooting. DC Power Troubleshooting
Initial Actions
- Cycle printer power.
- If the problem persists, follow the procedure below.
Troubleshooting Procedure Table
| Step | Actions and Questions | Yes | No |
|---|---|---|---|
| 1 | When the printer is turned on, can you hear the motor? | Go to step 2. | Go to step 5. |
| 2 | Is the Control Panel working? | Go to step 4. | Go to step 3. |
| 3 | Reseat both ends of the Control Panel cable. Does the error persist? | Go to step 4. | Complete. |
| 4 | Reseat the connectors on the Image Processor Board. Does the error persist? |
Complete. | Replace the IP Board and Control Panel |
| 5 | Reseat the connectors on the MCU Board. Does the error persist? |
Replace the LVPS | Complete. |