Xerox Phaser 3010
Troubleshooting. AC Power Troubleshooting
Initial Actions
- Cycle printer power.
- If the problem persists, follow the procedure below.
Troubleshooting Procedure Table
| Step | Actions and Questions | Yes | No |
|---|---|---|---|
| 1 | When the printer is turned on, can you hear the motor? | Go to “DC Power Troubleshooting” | Go to step 2. |
| 2 | Connect the power cord to a different outlet. Does the printer now work? |
Complete. | Go to step 3. |
| 3 | Check that the power cord is plugged in to both the printer and the outlet. Does the printer now work? |
Complete. | Go to step 4. |
| 4 | Disconnect the power cord and wait 1 minute. Reseat all of the connectors on the LVPS, and then turn the printer on. Does the printer now work? |
Complete. | Go to step 5. |
| 5 | Disconnect the power cord and wait 1 minute. Reseat the AC Inlet Harness, and then turn the printer on. Does the printer now work? |
Complete. | Replace the LVPS |