Xerox Phaser 3010
Service Mode. Fax/Scanner Diagnostic Test Procedures
Enter FAX Scanner Diagnostic
- Turn the printer Off
- Press and hold the Up and Down Arrow simultaneously and turn the printer On.
- Release the buttons when CE Mode Please wait appears on the display.
- Press OK at Fax/Scanner.
Scanner Maintenance
White Balance
This menu item reports the result of white balance which is performed when powering up.
Registration Param
This menu item adjusts registration parameters of the scanner.
Parameter | Range | Description |
---|---|---|
ADF Lead offset adjustment* | -2.0 mm to 2.0 mm 0.1 mm Step | Adjust Registration of ADF Lead. |
ADF Side offset adjustment* | -1.0 mm to 1.0 mm 0.1 mm Step | Adjust Registration of ADF Side. |
FB Lead offset adjustment | -2.0 mm to 2.0 mm 0.1 mm Step | Adjust Registration of FB Lead. |
FB Side offset adjustment | -1.0 mm to 1.0 mm 0.1 mm Step | Adjust Registration of FB Side. |
*.3-in-1 model does not have an ADF.
Auto Registration
This menu item reports the result of auto registration which is performed when powering up.
IIT I/O Check
Tests Scanner sensors and motors.
- FB Home Sensor - Tests the flatbed home position sensor.
- ADF Scan Sensor* - Tests the ADF scan sensor.
- ADF Document Sensor* - Tests the Feed sensor.
- ADF Cover Sensor* - Tests the ADF cover sensor
*.3-in-1 model does not have an ADF.