Xerox Phaser 3010
Service Mode. Motor Test Procedures Phaser 3010/3040
These tests check whether the Digital Output (DO) components (motor s and solenoid) operate. When the interlock is opened during a Motor Test the component stops.
When a paper jam or PQ problem occurs, or an error message or code is displayed, these test help to pinpoint the faulty part. Before executing the test, examine the details of the jam, PQ problem, or error, and isolate the faulty parts. These tests are available:
- Main Motor (Full, Slow)
- Feed Solenoid
- Toner Motor
Main Motor
- Enter CE Diagnostics
- Run the Main Motor (Full) test.
- Check that the Exit Roller rotates.
- Press the Cancel button to stop the test.
Feed Solenoid
The Feed Roller rotates when the Main Motor (FULL) and the Feed Solenoid tests are executed simultaneously.
- Enter CE Diagnostics
- Remove the Bypass Tray
- Run the Main Motor Full and Feed Solenoid tests.
- Check that the Feed Roller rotates.
- Press the Cancel button to stop the Feed Solenoid test.
- Press Cancel to stop the motor test.
- Replace the Bypass Tray.