Xerox CopyCentre C3545
Service Mode 02. DC Quick (Code Number List)
Once in the Service Mode, dC Routines can be selected by dC Number or by selecting the appropriate tabs starting at the Service Entry Screen.
Procedure
- Enter the Diagnostic Mode. Refer to Entering Diagnostic Navigator.
- Using the DC Quick pull-down menu (upper-right side of Diagnostics Service Entry Screen), select the desired dC routine. Table 1 is a complete list of dC Routines that are available from the DC Quick pull-down menu.
Table 1 dC Routines
| dC Number | Name | Description |
|---|---|---|
| 100 | Service Entry Screen | 1.Displays the Service Routine Tabs. 2.Lists Active Faults 3.Lists the item names of the HFSI’s that exceeded life expectancy. 4.Lists the jams that have occurred since the last Call Closeout. 5.Displays IOT S/W Version. 6.Lists the total copies/prints |
| 102 | Software Upgrade | Allows the machine software to change |
| 103 | Billing Display | Billing Counter setup |
| 104 | System Usage Counters | History of system usage |
| 105 | System Configuration | Install Phase (system), Install Phase (Main Controller), Product Identifier, Product Type, System Configuration, Line Frequency, Line Voltage, Customer Service Number, and Power Saver (current mode) and Market Region. |
| 108 | Software Versions | System Software identifiers |
| 109 | Billing Counts | Billing Counter Data |
| 111 | ESS Logging | ESS Log type, current status, results, and Faults that may have occurred. |
| 114 | ESS/Network Error Log | Occurrences of ESS shutdowns, errors, and warnings. |
| 115 | Maintenance Diagnostic Data | Machine usage data |
| 120 | Fault Counters | Number of Fault events after the last Complete Closeout (performed in Service Exit) to the current copy count. |
| 122 | Shut-down History | 1.History in three categories: Document Jam, Paper Jam and Other Fault. 2.Most recent 40 Faults (without categorizing) |
| 129 | Automatic Setting: Adjust System Registration | The IOT lead registration and side registration are matched. |
| 131 | NVM access: Read/Write NVM | Reference or set/change the NVM data. |
| 132 | Set Machine Serial Number. Read Billing Meter Information | Sets the Machine Serial Number with assistance of service support. Reads Billing Meter Information for MCU PWB. |
| 133 | Time | Adjust System Time, System Date, Time Display Format, and GMI Offset. |
| 135 | Service Data HFSI Counter | Part replacement life expectancy (threshold) and current value (usage). Allows changing the replacement life expectancy to a preset value in the PWS database and reset the current value. |
| 188 | Service Mode Exit Screen | Requirements for exit from the Service Mode. |
| 225 | User Bypass | Allows printing while in diagnostics mode. |
| 301 | NVM access: NVM initialization | Initiates NVM Data initialization |
| 303 | CCM POST Self Test Routine | Provides access to a group of diagnostic tests that also run at system boot and application loading. |
| 306 | IOT NVM Initialization by Category | Initiates NVM Data initialization by category. |
| 312 | ESS Echo tests | Network connectivity tests |
| 330 | Component Check: Component Control | Instructions and results of the Input Component Check and Output Component Check 1.You can monitor each Input Component or check the operation of each Output Component. 2.You can simultaneously check multiple Input Components and Output Components up to 11 total. |
| 361 | Save Restore | Save and restore NVM values. |
| 362 | Compare | Compares NVM values with stored NVM values. |
| 363 | ESS NVM Initialization by category | Initiates NVM Data initialization by category. |
| 371 | Configuration Page | Allows viewing of current software version and Market Place setting, Machine Configuration, Output Device(s), Accessories, Feature Config., and Input Device. These settings can be changed to align with the machine configuration. |
| 372 | IOT Configuration | Number of paper trays and finishing devices installed. |
| 374 | Software Options | Displays the status of software options |
| 375 | ESS Network Configuration Backup and Restore | Backup and Restore network connectivity settings. |
| 402 | Software Verify | |
| 527 | Size Detection | Test size detection capabilities. |
| 606 | ESS Test Patterns | Enables ESS test printing according to composition and media size. |
| 612 | Color Test Pattern Print | Generates test pattern from different pattern generators in the machine (IOT, IIT, CCM PWB, Network Controller PWB). Patterns for use in identifying IQ problems, setting registration, and performing adjustments |
| 640 | Video Path Test | EPC Memory walking, Video Path integrity, and ESS <-> CCM communication. |
| 681 | Regi-Con Cycles | Measurement cycle check |
| 683 | Regi-Con Cycles | Control Sensor check |
| 684 | Regi-Con Cycles | Calibration check |
| 685 | Regicon | Color Registration/Skew setup |
| 921 | ATC Calibration | Enter ATC Sensor Calibration code into NVM. |
| 922 | TRC Control/Toner Density Adjustment | Measures gray scale patch by the ADC sensor. Makes LUT for IOT TRC correction. |
| 924 | TRC Adjustment | Manually fine adjust each color (low/mid/high density) in PG. |
| 929 | Max Setup | Image quality check and setup |
| 934 | ADC/AGC Setup | Execute automatic adjustment of the ADC Sensor Gain. |
| 945 | IIT calibration | 1.Calculate and set the white reference compensation coefficient. 2.Correct the IIT sensitivity variation. |
| 956 | Belt Edge Learn | Belt Edge Sensor Set up |