Toshiba e-Studio 6530C
Adjustment. Image Dimensional
There are several adjustment items in the image dimensional adjustment, as listed below. Prior to this image dimensional adjustment, perform the “Automatic initialization of image quality control (05-396)”. When adjusting these items, the following adjustment order should strictly be observed.
| Item to be adjusted | Code in mode 05 | |
|---|---|---|
| 1. Paper alignment an the registration roller | 473, 4100, 4101, 4103, 4104,4105, 4106, 4107, 4108, 4109,4110, 4111, 4115, 4116, 4117,4118, 4120, 4122, 4123, 4124,4125, 4126, 4127, 4128,4129,4580, 4581, 4582, 4583, 4584,4585, 4586, 4587, 4588, 4589,4590, 4591, 4592, 4593, 4600,4601, 4602, 4603, 4604, 4605,4606, 4607, 4608, 4609, 4610,4611, 4612, 4613, 4615 | |
| 2. Printer- related image dimensional adjustment | Reproduction ratio of primary scanning direction (Image clock fine adjustment (Printer)) | 4772 |
| Primary scanning data laser writing start position | 411 | |
| Reproduction ratio of secondary scanning direction (Fine adjustment of transfer belt motor rotation speed) | 487 | |
| Secondary scanning data laser writing start position | 408, 440, 441, 444, 428, 442, 445 |
|
| Primary scanning data laser writing start position at duplexing | 498 | |
| 3. Scanner- related image dimensional adjustment | Image distortion | - |
| Reproduction ratio of primary scanning direction | 4773 | |
| Image location of primary scanning direction | 306 | |
| Reproduction ratio of secondary scanning direction | 340 | |
| Image location of secondary scanning direction | 305 | |
| Top margin | 430 | |
| Right margin | 432 | |
| Bottom margin | 3 | |