Toshiba e-Studio 6530C

1. Shut down the equipment.
2. Connect the USB media to the USB port on the right upper cover.
   Note:
   Restoring cannot be performed with multiple USB medias connected simultaneously.
3. Turn the power ON while pressing the [5] and [9] buttons simultaneously. A screen for selecting items to restore is displayed. Select the number (any of “2”, “4” and “6”) for data you want to restore. Press the [START] button.

   Number	Restore Item
   2: User Data Restore	Restoring up User data
   4: Setting Restore	Restoring up Setting item
   6: SRAM Data Restore	Restoring up SRAM data

   Note:
   The screen above is not displayed if the data cloning function is disabled. In this case, ask the
   user (machine administrator) to enable the data cloning function on the TopAccess menu.
4. A certain time after the [START] button is pressed, the following screen is displayed. Select the number of the desired data. The selected item will be displayed with an asterisk.
   When “2: User Data Restore” is selected

   Number	Restore Item
   1: Address Book	Restoring Address book
   2: MailBoxes	Restoring Mail box
   3: Template	Restoring Template
   4: Combined	Restoring 1: Address Book, 2: Mail Box and 3: Template in a batch
   5: Department Code	Restoring Department management
   6: User Info	Restoring User management information
   7: Role Info	Restoring role information

   When "4: Setting Restore" is selected

   Number	Restore Item
   1: Network/Print Service	Restoring TopAccess: Network/Print Service
   2: SaveAsFile/Email/InternetFAX	Restoring TopAccess: SaveAsFile/Email/InternetFAX
   3: Notification	Restoring TopAccess: Notification
   4: Directory Service	Restoring TopAccess: Directory Service
   6: WirelessLAN/Bluetooth Kit	Restoring Option: WirelessLAN/Bluetooth setting

   When "6: SRAM Data Restore" is selected

   Number	Restore Item
   1. SRAM	Restoring SRAM Data

5. Press the [START] button. The restore starts and the restoring status is displayed on the LCD screen.
6. “Restore Completed” is displayed on the LCD screen when restoring has been properly completed.
7. Turn the power OFF and remove the USB media. * When “department management data” or “user management data” are restored, clear their counter values in a procedure below.
8. Counter values can be all cleared as the data are copied. Note that the total counter values are not copied.

Procedure

Press the buttons as follows: [COUNTER] → [DEPARTMANT MANAGEMENT] → Enter the password..[RESET ALL COUNTERS]

* Enable the department management when the [RESET ALL COUNTERS] buttons is set to be disabled.