Toshiba e-Studio 6530C
Maintenance. PM Procedure
(1) Preparation
- Ask the user about the current conditions of the equipment and note them down.
- Before starting maintenance, make some sample copies and store them.
- See the replacement record and check the parts to be replaced in the PM support mode (6S- 2) or list printing mode (9S-103).
6S-2 : [6] + [START] + [POWER] ON → [2] → [START]
9S-103 : [9] + [START] + [POWER] ON → [103] → [START] - Turn OFF the power and make sure to unplug the equipment.
(2) Perform a preventive maintenance using the following checklist and illustrations.
(3) Plug in the equipment after the maintenance has been finished. Then turn ON the power and make some copies to confirm that the equipment is working properly.