Toshiba e-Studio 5520C

After having finished the “Automatic initialization of image quality control (05-396)” procedure, perform the “Forced performing of color registration control adjustment (05-4719)” procedure.

Code: 4719

Item to be adjusted

Forced performing of color registration control

Contents

Procedure

1. While pressing [0] and [5] simultaneously, turn the power ON. → Adjustment mode
2. Key in [4719] and press the [START] button.
3. When the adjustment finishes normally, the equipment returns to the initial state of Adjustment Mode.

When an error occurs

When “Waste toner box replacement” is displayed

1. Replace the waste toner box with a new one and close the waste toner box cover.
2. Release the waste toner box full status by the warming-up operation.
3. Check that “WAIT” is displayed.

When “ERROR” is displayed

1. Press and hold the [ON/OFF] button for a few seconds to shut down the equipment in order to check the toner empty status.
2. Turn the power ON.
3. Check the toner supply operation in warming-up. When a message prompts you to replace the toner cartridge, open the front cover and replace the cartridge with a new one.
4. Check that “WAIT” is displayed.