Toshiba e-Studio 5520C
Service Mode. BACKUP FUNCTION. Restoring procedure
- Shut down the equipment.
- Connect the USB media to the USB port on the right upper cover.
Note:
Restoring cannot be performed with multiple USB medias connected simultaneously. - Turn the power ON while pressing the [5] and [9] buttons simultaneously. A screen for selecting items to restore is displayed. Select the number (any of “2”, “4” and “6”) for data you want to restore. Press the [START] button.
Number Restore Item 2: User Data Restore Restoring up User data 4: Setting Restore Restoring up Setting item 6: SRAM Data Restore Restoring up SRAM data
The screen above is not displayed if the data cloning function is disabled. In this case, ask the
user (machine administrator) to enable the data cloning function on the TopAccess menu. - A certain time after the [START] button is pressed, the following screen is displayed. Select the number of the desired data. The selected item will be displayed with an asterisk.
When “2: User Data Restore” is selectedNumber Restore Item 1: Address Book Restoring Address book 2: MailBoxes Restoring Mail box 3: Template Restoring Template 4: Combined Restoring 1: Address Book, 2: Mail Box and 3: Template in a batch 5: Department Code Restoring Department management 6: User Info Restoring User management information 7: Role Info Restoring role information Number Restore Item 1: Network/Print Service Restoring TopAccess: Network/Print Service 2: SaveAsFile/Email/InternetFAX Restoring TopAccess: SaveAsFile/Email/InternetFAX 3: Notification Restoring TopAccess: Notification 4: Directory Service Restoring TopAccess: Directory Service 6: WirelessLAN/Bluetooth Kit Restoring Option: WirelessLAN/Bluetooth setting Number Restore Item 1. SRAM Restoring SRAM Data - Press the [START] button. The restore starts and the restoring status is displayed on the LCD screen.
- “Restore Completed” is displayed on the LCD screen when restoring has been properly completed.
- Turn the power OFF and remove the USB media. * When “department management data” or “user management data” are restored, clear their counter values in a procedure below.
- Counter values can be all cleared as the data are copied. Note that the total counter values are not copied.
Procedure
Press the buttons as follows: [COUNTER] → [DEPARTMANT MANAGEMENT] → Enter the password..[RESET ALL COUNTERS]
* Enable the department management when the [RESET ALL COUNTERS] buttons is set to be disabled.