Toshiba e-Studio 4508AG
Troubleshooting. Image 5. Toner offset (shadow image) at the edges
Toner offset (shadow image) sometimes appears at both edges of the paper when a wide-size sheet is printed following the continuous printing of narrow-size ones or rotate sort-printing. In such a case, change the setting of Wait between the printings of narrow-size and wide-size paper.
Notes:
- When the setting is changed, toner offset can be reduced; however, the performance (printing speed) will also be lowered accordingly. Therefore, the setting should only be changed depending on the occurrence frequency or corresponding to users' requests.
- The values below are the recommended ones. Therefore, adjust the values according to the situation.
1. Combined job
| Code | Recommended setting value | Remarks |
|---|---|---|
| FS-08-5455 | 5 | Wait is carried out with a small number of sheets. |
| FS-08-5456-0 | 45 | The Wait period is extended. |
| FS-08-5456-1 | 45 | |
| FS-08-5456-2 | 45 |
2. When Ready is inserted between jobs
| Code | Recommended setting value | Remarks |
|---|---|---|
| FS-08-2074 | 3 | The Wait period is extended. |