Toshiba e-Studio 4508AG
Firmware Update
Store the data file for updating in the model specific folder. This configuration is an example. The number of files differs depending on the installed option.
Model specific folder name 2008A_5008A
2008A_5008A
T410HD0Wxxxx.tar
T410SF0Wxxxx.tar
H616DFWW.xxx
PUN6105T.xxx
FIN1110T.xxx
T410NIC0Wxxxx.tar
TH410FWW.xx
FIN1109T.xxx
TH410MWW.xx
TH410SLGWW.xxx
H617DFWW.xxx
FIN1042T.xxx
USB device
Signature_N_2008A.sig
Update procedure
Important:
- The file system of a USB device should be formatted in the FAT16 or FAT32 format. USB devices formatted in an NTFS or another format will not be able to be operated. The file system of a USB device can be confirmed by opening its property using Windows Explorer or such.
- Never shut down the equipment during the update. Firmware data and the following option data (if installed) could be damaged and may not be able to be operated properly.
- Data Overwrite Enabler (GP-1070)
- Meta Scan Enabler (GS-1010)
- External Interface Enabler (GS-1020)
- IPsec Enabler (GP-1080)
- OCR Enabler (GS-1080/1085)
- Multi Station Print Enabler (GS-1090/1095)
Updating firmware
- Connect the USB device to the PC and write the model specific folder in which the data file is stored. Store the data file for updating in the model specific folder.
- Press the [ON/OFF] button to shut down the equipment.
- Connect the USB device to the USB port.
- Start the HS Menu.
- Press [49 Firmware Update].
- Select the update type.
Normal Update
Patch Update
Diff Update
Notes:
• The update file which is selected must be included in the model specific folder. There is no problem if updated files of different types are mixed.
• The screen for selecting items to be updated is displayed.
- Only the firmware which is included in the update file is displayed.
- The firmware whose version is later than the current one is being selected to be updated if there is such in the update file.
• The display of items on this screen varies depending on the types of data written on the USB device. Each item is displayed only when each data file is written on the USB device in the following conditions. - Select the item. The item selected is highlighted and a check is marked at its left side. If you press the item once again, its selection is released.
- Press [OK]. Updating starts and the processing status is displayed on the screen.
- When updating is completed properly, the following message is displayed at the bottom of the LCD screen.
Standard update: Update successfully completed Restart the MFP
Patch update: Patch Update Successfully Restart the MFP
Differential items update: Differential Update Successfully Restart the MFP
Notes: Troubleshooting when “Customized UI version is not compatible!” is displayed In the equipment with the customized UI installed, when its version is not compatible with that for the HDD DATA to be installed, “Customized UI version is not compatible!” is displayed and the updating will fail. To continue the updating, perform FS-08-3512 (Customized UI uninstallation).
Notes: Troubleshooting
• Even though an update fails, do not turn the power OFF until other updates are finished.
• “Update Failed.” is displayed at the bottom of the screen when the updating is not completed properly. “Failed” appears next to the failed item on the status display. If “Update Failed” appears at the bottom of the screen, turn OFF the power and then check the following items.
After confirming and clearing the problems, restart updating from the beginning.
- Does the USB device meet the conditions to be used for updating?
- Is the data file written properly on the USB device?
- Is the USB device installed properly?
- Do the USB device and equipment operate properly?
- When H05 error occurs and it does not clear after a USB media check, replace the main memory (DIMM).
• The integrity check system is automatically operated before firmware updating. During this operation, “Verifying Signature...” and “Progress: **%” are displayed on the control panel. When the check is completed properly, no message for notifying the success will appear and the firmware updating will start. If it fails, “Invalid Signature” and “Copy Data with >valid signature in USB” will be shown. In that case, firmware updating cannot be performed, so turn the power OFF and disconnect the USB device. Check that there is no abnormality in the firmware data, and reperform the update.
• When a system firmware (OS Data) update error or system software (HD Data) update error occurs, “Update Failed” or “Failed” appears on the screen and the error number appears next to the message.
• When an Engine firmware update error, Scanner firmware update error, RADF/DSDF firmware update error, Punch firmware update error, Finisher firmware update error or FAX firmware update error firmware error occurs, “Update Failed” or “Failed” appears on the screen and the error number and error message appear next to the message. For details of each error, refer to the following tables. - Check that [Automatic Initialization] is displayed and then remove the USB device.
- Press [Automatic Initialization]. The equipment is rebooted and the initialization of the updating data is carried out.
Confirmation of the updated data
After the updating is completed, check each data version in the 08 Setting Mode to confirm that the data were overwritten properly.
| Firmware | Code |
|---|---|
| System software | 9900 |
| System firmware | 9930 |
| Engine firmware | 9901 |
| Scanner firmware | 9902 |
| NIC firmware | 9990 |
| DF firmware | 9903 |
| Finisher firmware | 9904 |
| Hole punch firmware | 9944 |
| FAX board firmware(Line1) | 9905 |
| FAX board firmware(Line2) | 9969 |