Toshiba e-Studio 407CS

2-3 Bad odors are generated.

Locating the exact position of generating bad odor

Check item	Check work	Action to be taken at NG
Fuser unit	Remove the fuser unit and check the odor.	Implement section (2-3-2).
Low voltage power supply unit	Remove the low voltage power supply unit and check the odor.	Replace the low voltage power supply unit

Check conditions of the fuser unit

Check item	Check work	Action to be taken at NG
Life count of fuser unit	Check the life count of the fuser unit by using the self-diagnostic mode.	The fuser close to the new fuser unit smells some odors.
Check that no foreign material exists in fuser unit.	Check that no foreign materials such as paper are stuck inside of the fuser unit.	Remove the foreign material.

2-4 Rise-up time is slow.

Check the fuser unit

Check item	Check work	Action to be taken at NG
Halogen lamp	Check that 120V or 230V is shown on the label on the rear of the fuser unit. (120V:ODA,230V:ODA/OEL)	Replace the fuser unit.