Toshiba e-Studio 306SE

Overview

The following self-diagnostic modes can be used with Service UI on the touch panel of the control panel.

• 04 TEST PRINT MODE
• 05 ADJUSTMENT MODE
• 08 SETTING MODE
• 6S PM SUPPORT MODE
• 9S LIST PRINT MODE
• FAX LIST PRINT MODE
• CHART PRINT MODE

Notes:
Not all codes of the self-diagnostic mode can be used with Service UI. Refer to Chapter 15 for the codes available with Service UI.

Login procedure

In the normal mode

1. Turn the power ON.
2. Press the [USER FUNCTIONS] button.
3. With the [USER FUNCTIONS] menu displayed, enter the Service Mode password provided during product training.
   
4. Enter the user name and password on the SERVICE TECHNICIAN PASSWORD screen, then press [OK]. They are set by default as follows:
   User Name: Service
   Password: None

In the security mode

If the security mode (the value of 08-8911 is “3”) is set, log into Service UI following the steps below.

1. Turn the power ON.
2. Enter the user name and password on the USER AUTHENTICATION screen. The password needs to be changed to log in for the first time.
   Notes: In case the password is forgotten, ask the administrator to reset the service password. In case both the service password and administrator password are forgotten, the passwords can be reset in the password reset mode. Note that the user data are deleted at that time.
3. Press the [USER FUNCTIONS] button.
4. Enter the password for Service UI on the USER FUNCTIONS screen. The SERVICE MODE screen is displayed.

[SERVICE MODE] Screen

After selecting the mode and pressing the [NEXT] button, the screen is switched to the selected mode.

• When the 05/08 mode is selected The codes are displayed in one of the levels from the first to fifth.
  You can proceed to the next level by selecting the item and pressing the [NEXT] button until the code appears up to the fifth level. Then if you select the code and press the [NEXT] button, the screen is switched to the adjustment mode or setting mode.
  If you press the [CLASSIC] button on the screen in the first level, the screen is switched to the adjustment mode or setting mode, so that you can enter the code number.
• When the modes other than 05/08 mode are selected The screen is switched to the selected mode.

Setting/Changing password

1. Press the [SETTINGS] button on the SERVICE MODE screen to display the SETTINGS screen.
2. Press the [SERVICE PASSWORD] button to change the service password, or [RESET ADMIN PASSWORD] to reset the administrator password.