Toshiba e-Studio 2829A
Firmware Updating with BIOS Mode
Notes:
- Use the BIOS mode if firmware updating cannot be done with either a USB device or a PC update tool.
- Firmware updating with the BIOS mode is available only for the system ROM and not for the engine ROM.
General description
The BIOS mode can upgrade the version of the system ROM only while this mode is being operated by connecting your PC and the equipment with a USB cable by means of a PC update tool.
Preparation
- Before using a PC update tool, install the scanner driver of the equipment in your PC.
- Add the “.bin” extension to the file name of the firmware to be updated.
Update procedure
- Turn OFF the power of the equipment, and connect it and the PC with a USB cable.
- Turn the power ON while pressing the [OK] button simultaneously. (Start the equipment with the BIOS mode)
- Confirm that the BIOS mode has started from the LCD panel of the equipment.
*BIOS MODE*
20XX/XX/XX V0.XX
Notes:
Proceed to the next step after you check the display. - Double-click the icon “UpdateFW.exe” to start up the PC update tool.
- Click the [Browse] button.
- Select the file you want to update.
*** Indicates the version number.Model Firmware File name 2323AM/2823AM System ROM TT01SY0Z***.bin 2523A/2523AD System ROM TT02SY0Z***.bin 2329A/2829A System ROM TT03SY0Z***.bin - Click the [Update] button.
The update starts and a status bar appears on the operating panel of the equipment.
Remarks: From 1 to 2 minutes are required to update. - The following message appears if the program data is not transmitted correctly.
- When the program data transmission is completed, the message shown below appears.
FIRMWARE UPDATE
FIRMWARE UPDATE OK
MACHINE POWER OFF/ON - Turn OFF the power of the equipment.
- If you update the system ROM, initialize the updated data.
• Turn ON the power while [0] button and [8] button are pressed simultaneously.
• Key in “9030”, and then press the [START] button.
• Press the [OK] button. - When the update is finished, remove the USB cable.