Toshiba e-Studio 2515AC
Maintenance. PM Display
The maintenance timing for the PM parts of the process unit, such as the drum and developer material, and the PM parts of the units other than the process unit, such as the 2nd transfer roller varies depending on the conditions of the use, such as the ratio of color/black printing. Therefore, this equipment shows the appropriate maintenance timing of each part on the control panel LCD.
PM Display Conditions
The conditions of the PM display consist of the codes of the 08 SETTING MODE for “the setting value treated as a threshold of the PM display”, “the counter indicating the current number of prints and driving time” and “the setting value which determines the display conditions”. The PM timing is displayed when the counter exceeds the setting value according to the display condition based on “the setting value which determines the display conditions”.
• Setting value treated as a threshold of the PM display
Notes:
When “0” is entered as the setting value, PM timing is not displayed.
FS-08-6190: Setting value of PM counter [process unit (K)]
FS-08-6191: Setting value of PM time counter [process unit (K)]
FS-08-6192: Setting value of PM counter [process unit (Y)]
FS-08-6193: Setting value of PM time counter [process unit (Y)]
FS-08-5550: Setting value of PM counter [process unit (M)]
FS-08-5551: Setting value of PM time counter [process unit (M)]
FS-08-5552: Setting value of PM counter [process unit (C)]
FS-08-5553: Setting value of PM time counter [process unit (C)]
FS-08-5554: Setting value of PM counter [developer material (K)]
FS-08-5555: Setting value of PM time counter [developer material (K)]
FS-08-5556: Setting value of PM counter [developer material (Y)]
FS-08-5557: Setting value of PM time counter [developer material (Y)]
FS-08-5558: Setting value of PM counter [developer material (M)]
FS-08-5559: Setting value of PM time counter [developer material (M)]
FS-08-5560: Setting value of PM counter [developer material (C)]
FS-08-5561: Setting value of PM time counter [developer material (C)]
FS-08-5562: Setting value of PM counter [parts other than the PM parts of the process unit]
FS-08-5563: Setting value of PM time counter [parts other than the PM parts of the process unit]
• Counter indicating the current number of prints and driving time
FS-08-6194: Current value of PM counter [process unit (K)]
FS-08-6195: Current value of PM time counter [process unit (K)]
FS-08-6196: Current value of PM counter [process unit (Y)]
FS-08-6197: Current value of PM time counter [process unit (Y)]
FS-08-5564: Current value of PM counter [process unit (M)]
FS-08-5565: Current value of PM time counter [process unit (M)]
FS-08-5566: Current value of PM counter [process unit (C)]
FS-08-5567: Current value of PM time counter [process unit (C)]
FS-08-5568: Current value of PM counter [developer material (K)]
FS-08-5569: Current value of PM time counter [developer material (K)]
FS-08-5570: Current value of PM counter [developer material (Y)]
FS-08-5571: Current value of PM time counter [developer material (Y)]
FS-08-5572: Current value of PM counter [developer material (M)]
FS-08-5573: Current value of PM time counter [developer material (M)]
FS-08-5574: Current value of PM counter [developer material (C)]
FS-08-5575: Current value of PM time counter [developer material (C)]
FS-08-5576: Current value of PM counter [parts other than the PM parts of the process unit]
FS-08-5577: Current value of PM time counter [parts other than the PM parts of the process unit]
• Setting value which determines the display conditions
FS-08-6198: Switching of output pages/driving counts at PM [process unit (K)]
FS-08-5578: Switching of output pages/driving counts at PM [process unit (Y)]
FS-08-5579: Switching of output pages/driving counts at PM [process unit (M)]
FS-08-5580: Switching of output pages/driving counts at PM [process unit (C)]
FS-08-5581: Switching of output pages/driving counts at PM [developer material (K)]
FS-08-5582: Switching of output pages/driving counts at PM [developer material (Y)]
FS-08-5583: Switching of output pages/driving counts at PM [developer material (M)]
FS-08-5584: Switching of output pages/driving counts at PM [developer material (C)]
FS-08-5585: Switching of output pages/driving counts at PM [parts other than the PM parts of the process unit]
PM Display Contents
When the counter value exceeds the setting value, the equipment notifies you of when the maintenance time has come by displaying the message “Time for periodic maintenance ****” on the control panel LCD. “****” in the message is a 4-digit hexadecimal number code. This number is allocated in the following manner, therefore the parts needing maintenance can be identified.
PM parts of the process unit (K) : 0008
PM parts of the process unit (Y) : 0001
PM parts of the process unit (M) : 0002
PM parts of the process unit (C) : 0004
Developer material (K) : 0080
Developer material (Y) : 0010
Developer material (M) : 0020
Developer material (C) : 0040
Parts other than the PM parts of the process unit : 0100
If multiple parts have reached the maintenance time, the sum of the corresponding code values listed above is displayed in hexadecimal numbers. For example, if the PM parts of the process units (K) and (C) and the developer materials (K) and (C) reach the maintenance time, the 4-digit hexadecimal number code will be “00CC” in hexadecimal numbers: 0008+0004+0080+0040=00CC.