Toshiba e-Studio 2515AC

Starting each Menu

FS Menu

[FUNCTION CLEAR] + [START] + [POWER ON] → Enter a service password and press [OK].

• 03 TEST MODE → SELFDIAGNOSIS CODE
• 04 TEST PRINT MODE → SELFDIAGNOSIS CODE
• 05 ADJUSTMENT MODE → CLASSIC*2 → SELFDIAGNOSIS CODE
• 08 SETTING MODE → CLASSIC*2 → SELFDIAGNOSIS CODE
• 20 PM SUPPORT MODE
• 30 LIST PRINT MODE
• 31 CHART PRINT MODE
• 11 FAX CLEAR MODE → SELFDIAGNOSIS CODE
• 12 FAX LIST PRINT MODE → SELFDIAGNOSIS CODE
• 13 FAX FUNCTION MODE → SELFDIAGNOSIS CODE
• 19 RAM EDIT MODE*3 → SELFDIAGNOSIS CODE
• 35 DATA BACKUP/ RESTORE MODE
• 36 CLONING
• 37 LICENSE MANAGEMENT

HS Menu

[HOME] + [START] + [POWER ON] → Enter a service password and press [OK].

• 01 Control Panel Check
• 49 Firmware Update
• 59 SRAM Data Cloning
• 73 Firmware Assist
• 74 HDD Assist
• 75 File System Recovery
• 76 SRAM Maintenance

*1 FS menu: Select the mode and press [NEXT].
HS menu: Select the icon of the mode.

*2 Press [CLASSIC] displayed at the upper right of the menu.

*3 This is not used generally.

Cancelation of the self-diagnostic mode

The modes, which can be entered from [FS Menu], can be canceled by the following methods.

• When [FS Menu] is displayed on the screen: Press [FS Menu] to return to the menu screen. Press [NORMAL]. The self-diagnostic mode finishes and the [HOME] screen appears. Rebooting/non-rebooting of the equipment will be performed depending on the mode worked and the code operated.
• When only [Return] is displayed on the screen: Press [Return] for several times until [FS Menu] is displayed on the screen. When [FS Menu] appears, press it.
• When neither [Return] nor [FS Menu] are not displayed on the screen: Press the [ON/OFF] button and perform the shut-down operation on the screen displayed.

To cancel the modes, which can be entered from [HS Menu] press the [ON/OFF] button for a few seconds to shut down the equipment.

Changing/setting of the service password

1. The [SETTINGS] screen is displayed by press [SETTINGS] on [FS Menu].
2. Press [Service Password] to change or reset the service password.