Toshiba e-Studio 2500c

M. Fuser unit

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
M1	Pressure roller			140(100)		44-1
M2	Pressure roller sep­aration finger			140(100)		44-18	*m1
M3	Pressure roller ther­mistor (center/rear)	A		R		44-13, 14	*m2
M4	Fuser belt			140(100)		43-3
M5	Heat roller			R		43-10
M6	Fuser roller			140(100)		43-4
M7	Fuser belt guide			140(100)		43-12
M8	Fuser belt front ther­mistor	A		R		43-21
M9	Fuser belt thermo­stat (center/rear)	A		R		43-19, 20
M10	Separation plate	A				43-2
M11	Entry guide	A				44-27, 28
M12	Fuser unit gear		W2			44-30	*m3

Note:
When any or all of M4, M5 and M6 is replaced or taken off from the fuser unit, perform adjustment for the separation plate gap.

N. Exit unit

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
N1	Upper exit roller	A				46-21
N2	Lower exit roller		W2			46-30	*n1

O. RADF (MR-3018)

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
O1	Pickup roller	A		120		5-1
O2	Separation roller	A		120		4-10
O3	Feed roller	A		120		5-1
O4	Registration roller	A
O5	Intermediate transfer roller	A
O6	Front read roller	A
O7	Platen roller	A
O8	Rear read roller	A
O9	Reverse registration roller	A
O10	Exit/reverse roller	A
O11	Platen sheet	B or A

P. PFP (KD-1018)

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
P1	Pickup roller (upper/lower)	A		80		5-29
P2	Feed roller (upper/lower)	A		80		5-26
P3	Separation roller (upper/lower)	A	AV, W2	80		5-12	*p1
P4	Drive gear (tooth face)		W1

Q. LCF (KD-1019)

Items to check		Cleaning	Lubrication/ Coating	Replacement (x 1,000 sheets)	Operation check	Parts list <P-I>	Remarks
Q1	Pickup roller	A		160		4-30
Q2	Feed roller	A		160		4-28
Q3	Separation roller	A		160		5-12
Q4	Drive gear (tooth face)		W1