-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Toshiba e-Studio 232
Troubleshooting. Image. 21 Uneven light distribution, Blotched image
21) Uneven light distribution
Defective area |
Step |
Check items |
Prescription |
Original glass |
1 |
Is the original glass dirty? |
Clean the original glass. |
Main charger |
2 |
Are the needle electrode, main charger grid and main charger case dirty? |
Clean or replace them. |
Discharge LED |
3 |
Is the discharge LED dirty? |
Clean the discharge LED. |
4 |
Is any of the discharge LEDs off? |
Replace the discharge LED. |
Scanner |
5 |
Are the reflector, exposure lamp, mirrors, lens, and original glass (especially the position of shading correction plate) dirty? |
Clean them. |
Exposure lamp |
6 |
Is the exposure lamp tilted? |
Adjust the position of the exposure lamp. |
7 |
Is the exposure lamp discolored or degraded? |
Replace the exposure lamp. |
22) Blotched image
Defective area |
Step |
Check items |
Prescription |
Paper |
1 |
Is the paper type corresponding to its mode? |
Check the paper type and mode. |
2 |
Is the paper too dry? |
Change the paper. |
Separation |
3 |
Is the output from the separation charger too high? |
Adjust the output, from the separation charger. |
Transfer |
4 |
Is the transfer charger case dirty? |
Clean the transfer charger case. |
5 |
Is the transfer charger wire dirty? |
Clean the transfer charger wire. |
High-voltage transformer (Transfer charger) |
6 |
Is the output from the high-voltage transformer normal? |
Adjust the output. Replace the transformer if necessary. |