Toshiba e-Studio 223
Service Mode 8S. Access Code
Storing/deleting of the access code, and confirming and changing of the counter value can be done in the access code mode (8S).
Note:
Department management must be enabled in FUNC-18 (bit-2) before you can use a registered access code.
Setting procedure
Registering the access code
Notes:
- Register up to 99 access codes in 3-digit numbers from 001 to 999.
- If the [START] button is pressed with an access code which has been already registered, a beep sounds and the display returns to the initial screen.
Deleting the access code
Notes:
- Auto search for the access code: Every time the [INTERRUPT] button is pressed, registered access codes are displayed in order.
- If the [START] button is pressed with an access code which has not been registered previously, the display returns to the initial screen.