-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Toshiba e-Studio 2051c
Maintenance. 1 General Descriptions for PM Procedure
- Preparation
• Ask the user about the current conditions of the equipment and note them down.
• Before starting maintenance, make some sample copies and store them.
• See the replacement record and check the parts to be replaced in the PM support mode (6S) or list printing mode (9S-103).
6S : [6] + [START] + [POWER] ON
9S-103 : [9] + [START] + [POWER] ON → [103] → [START]
• Turn OFF the power and make sure to unplug the equipment.
- Perform a preventive maintenance using the following checklist and illustrations. Refer to the Service Manual if necessary.
- Plug in the equipment after the maintenance has been finished. Then turn ON the power and make some copies to confirm that the equipment is working properly.
