Toshiba e-Studio 2051c

After having finished the “Forced performing of image quality closed-loop control (05-2742)” procedure, perform the “Forced performing of color registration control adjustment (05-4719)” procedure.

Code: 4719

Item to be adjusted

Forced performing of color registration control

Contents

<Procedure>

1. While pressing [0] and [5] simultaneously, turn the power
   ON. → Adjustment mode
2. Key in [4719] and press the [START] button.
3. When the adjustment finishes normally, the equipment returns to the initial state of Adjustment Mode.

If the following errors are displayed after performing 05-4719, clear the error by following the steps below, and then perform 05-4719 again.

<When “Waste toner box replacement” is displayed>

1. Replace the waste toner box with a new one and close the front cover.
2. Key in [4833] (Recovery from toner empty/waste toner full).
3. Check that “WAIT” is displayed.

<When toner empty is displayed>

1. Replace the empty toner cartridge with a new one and close the front cover.
2. Key in [4833] (Recovery from toner empty/waste toner full).
3. Check that “WAIT” is displayed.