Toshiba e-Studio 202S
Maintenance. Table
1. Maintenance table
✖ : Check (Clean, adjust, or replace when required.) ○ : Clean ▲ : Replace △ : Adjust ☆: Lubricate
Section | Parts | 25K | 50K | 75K | 100K | 125K | Remark |
---|---|---|---|---|---|---|---|
Developing | Developer | ▲ | ▲ | ▲ | ▲ | ▲ | |
DV blade | ○ | ▲ | ○ | ▲ | ○ | ||
DV side seal (F/R) | ○ | ▲ | ○ | ▲ | ○ | ||
Process peripheral | Drum | ▲ | ▲ | ▲ | ▲ | ▲ |
2. Maintenance display system
Toner | Life | 8K | |
Remaining quantity | NEAR EMPTY About 12.5% |
EMPTY | |
LED | ON | Flash | |
Machine | Operation allowed | Stop | |
Developer | Life | 25K | |
LED | ON at 25K of the developer count. | | ||
Machine | Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup. (If Stop is selected, the LED will flash and stop at 25K.)
|
||
Maintenance | LED | Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
|
|
Machine | Not stop. |
Note:
When developer is replaced, be sure to execute simulation No. 24-06 to reset the counter.