Toshiba e-Studio 202S
Simulation Mode. List of simulation 26 - 67
| Sim No. |
Kind of main code | Sub code |
Operation |
|---|---|---|---|
| 26 | Various setup | 07 20 30 37 39 40 42 54 62 |
Machine conditions check Rear edge void setup CE mark support control ON/OFF Cancel of stop at developer life over Memory capacity check Polygon motor OFF time setup (Time required for turning OFF after completion of printing) Transfer ON timing control setup Side void setup Y life correction setup Energy-save mode copy lamp setup |
| 30 | Sensor operation check (Standard provision) |
01 | Paper sensor status display |
| 41 | OC cover float detection | 06 07 |
OC cover float detection level adjustment <ADF model only> OC cover float detection margin setting <ADF model only> |
| 43 | Fusing temperature setup | 01 04 09 11 14 15 |
Fusing temperature setting (Normal copy) Fusing temperature setting in multi copy Fusing control setting for postcard-size paper Fusing temperature setting for postcard-size paper Fusing start temperature setting Postcard size paper fusing control cycle sync setting |
| 46 | Exposure adjustment | 01 02 18 19 20 29 30 31 32 |
Copy density adjustment (300dpi) Copy density adjustment (600dpi) Image contrast adjustment (300dpi) Exposure mode setup ADF exposure correction <ADF model only> Image contrast adjustment (600dpi) AE limit adjustment Image sharpness adjustment Copier color reproduction setup |
| 48 | Magnification ratio correction | 01 05 |
Front/rear (main scanning) direction and scan (sub scanning) direction magnification ratio adjustment The current ADF mode sub scan direction magnification ratio is displayed on the LCD/7seg. <ADF model only> |
| 49 | Program download | 01 | Flash ROM program writing mode |
| 50 | Lead edge adjustment | 01 06 10 12 |
Lead edge image position Copy lead edge position adjustment (ADF) <ADF model only> Center offset adjustment Document off-center adjustment |
| 51 | Timing adjustment | 02 | Resist quantity adjustment |
| 53 | ADF scan adjustment | 08 | ADF scan position automatic adjustment <ADF model only> |
| 61 | Laser system operation | 03 | Polygon motor check (HSYNC output check) |
| 63 | Shading | 01 02 12 13 |
Shading check Black level automatic correction Light quantity stabilization wait time setting Light quantity stabilization band setting |
| 64 | Self print | 01 | Self print |
| 67 | USB adjustment | 50 | USB receive speed adjustment (USB1.1) |