Toshiba e-Studio 202S
Simulation Mode. List of simulations 01 - 26
| Sim No. |
Kind of main code | Sub code |
Operation |
|---|---|---|---|
| 01 | Optical system | 01 | Mirror scan operation |
| 02 | Mirror home position sensor (MHPS) status display | ||
| 06 | Aging of mirror scanning | ||
| 02 | ADF Individual load operation | 01 | Automatic Document Feeder (ADF) |
| 02 | aging operation <ADF model only> ADF sensor status display <ADF model only> | ||
| 03 | ADF motor ON <ADF model only> | ||
| 05 | Lamp ON check | 01 | Operation panel display check |
| 02 | Fusing lamp, cooling fan operation check | ||
| 03 | Copy lamp ON | ||
| 06 | Machine individual load operation | 01 | Paper feed solenoid ON |
| 02 | Resist solenoid ON | ||
| 07 | Aging | 01 | Warm-up display and aging with jam |
| 06 | Intermittent aging | ||
| 08 | Shift to copy with the warm-up display. | ||
| 08 | High voltage output check | 01 | Developing bias |
| 02 | Main charger (Grid high) | ||
| 03 | Grid voltage (Low) | ||
| 06 | Transfer charger | ||
| 10 | Toner motor operation check | NONE | Toner motor aging |
| 14 | Trouble reset | NONE | Cancel of troubles other than U2 |
| 16 | U2 trouble reset | NONE | Cancel of U2 trouble |
| 20 | Maintenance counter clear | 01 | Maintenance counter clear |
| 21 | Maintenance cycle setting | 01 | Maintenance cycle setting |
| 22 | Counter display | 01 | Maintenance counter display |
| 02 | Maintenance preset value display | ||
| 04 | JAM total counter display | ||
| 05 | Total counter display | ||
| 06 | Developer counter display | ||
| 08 | ADF counter display <ADF model only> | ||
| 12 | Drum counter display | ||
| 13 | CRUM type display | ||
| 14 | ROM version display | ||
| 17 | Copy counter display | ||
| 18 | Printer counter display | ||
| 19 | Scanner mode counter display <Scanner model only> | ||
| 21 | Scanner counter display | ||
| 22 | ADF JAM counter display <ADF model only> | ||
| 24 | Counter clear | 01 | JAM total counter clear |
| 04 | ADF counter clear <ADF model only> | ||
| 06 | Developer counter clear | ||
| 07 | Drum counter clear | ||
| 08 | Copy counter clear | ||
| 09 | Printer counter clear | ||
| 13 | Scanner counter clear | ||
| 14 | ADF JAM total counter clear <ADF model only> | ||
| 15 | Scanner mode counter clear <Scanner model only> | ||
| 25 | Main motor ON | 01 | Main motor operation check (Cooling fan motor rotation check) |
| 10 | Polygon motor ON | ||
| 26 | Various setup | 02 | ADF setup |
| 03 | Second cassette setup | ||
| 04 | Machine duplex setup | ||
| 06 | Destination setup |