Toshiba e-Studio 195i
Troubleshooting. Image 7. Blank copy
Defective area | Step | Check items | Prescription |
---|---|---|---|
Transfer charger wire | 1 | Is the transfer charger wire cut off? | Replace the transfer charger wire. |
High-voltage transformer (Transfer charger, Developer bias) | 2 | Is the high-voltage transformer output defective? | Adjust the output, or replace the transformer. |
3 | Are the connectors of the highvoltage harness securely connected? Is the harness open circuited? | Reconnect the harness securely. Replace the high-voltage harness. | |
Developer unit | 4 | Is the developer unit installed properly? | Check and correct the engaging condition of the developer unit gears |
5 | Do the developer sleeve and mixers rotate? | Check and fix the drive system of the developer unit. | |
6 | Is the developer material smoothly transported? | Remove the foreign matter from the developer material. | |
7 | Has the magnetic brush phase been shifted? | Adjust the developer polarity. | |
8 | Is the doctor blade positioned properly? | Adjust it using the doctor-sleeve jig. | |
Drum | 9 | Is the drum rotating? | Check the drive system of the drum. |
MAIN, LDR, SNS boards, CIS unit and harnesses | 10 | Are the connectors securely connected? Check if the harnesses connecting the boards are open circuited. |
Connect the connectors securely. Replace the harness. |