Toshiba e-Studio 195
Troubleshooting. Image 4. Toner offset
Toner offset (Shadow image appears approx.94mm toward the dark image.)
Defective area | Step | Check items | Prescription |
---|---|---|---|
Density | 1 | Is the density too high? | Adjust the density. |
Fuser unit | 2 | Is the pressure of the fuser roller normal? | Check the pressure releasing parts and pressurization mechanism. |
3 | Is the thermistor in contact with the fuser roller? | Contact the thermistor with the fuser roller. | |
4 | Is there a scratch on the fuser roller surface? | Replace the fuser roller. | |
5 | Has the fuser roller reached its PM life? | Replace the fuser roller. | |
6 | Is the setting temperature of the fuser roller normal? | Check the adjustment values of fuser roller temperature? 08-407, 410, 411, 450, 515, 516 | |
Paper | 7 | Has the appropriate paper type been selected? | Select a proper mode. |
8 | Is the setting temperature of the fuser roller in each paper type normal? | Check the setting and correct it. 08-413, 437, 438, 451, 452, 453, 520, 521 | |
9 | Using the recommended paper? | Use the recommended paper. | |
Developer material | 10 | Using the specified developer material? | Use the specified developer material and toner. |
Scanner | 11 | Are the original glass (especially the position of shading correction plate) and CIS unit dirty? | Clean them. |