Toshiba e-Studio 165

Self-diagnosis Modes

Mode	For start	Contents	For exit
Adjustment mode	[0]+[5]+ [POWER]	Adjusts various items.	[POWER] OFF/ON
Setting mode	[0]+[8]+ [POWER]	Sets various items.	[POWER] OFF/ON
Function setting mode	[1]+[3]+ [POWER]	Conducts OPE. PANEL TEST, PRINT TEST, SEN- SOR TEST, OUTPUT TEST.	[POWER] OFF/ON
RAM clear mode	[Specified keys]+ [POWER]	RAM clear.	[POWER] OFF/ON
Country/Region mode	[0]+[2]+ [POWER]	Country/Region code.	-

 

Test Modes

Mode	For start	Contents	For exit
AUTO TEST	Press the [USER FUNC- TIONS] button while READY is indicated, and then press the [*], [#], [*], [*] keys.	Use this mode to diagnose the equipment by auto- matically performing a series of tests.	READY: Press the [USER FUNC- TIONS] but- ton. Test Mode Menu:  Press the [*], [#], [*], [*] keys.
INDIVIDUAL TEST		Use this mode to perform a test dialogically and locate a failure from the test result.
TEST RESULT LIST		Use this mode to print the results of "AUTO TEST" and "INDIVIDUAL TEST".
FUNCTION TEST		Use this mode to check each function of the equip- ment.
MAINTENANCE		Use this mode to perform setups for Memory Clear, Fax, etc.
SERVICE LIST		Use this mode to Print PROTOCOL TRACE, TOTAL ERROR, etc.
FUNCTION		Use this mode to Print FUNCTION LIST.

Note:

To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0] and [5]) are pressed simultaneously

*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.