Toshiba DP1660

Self-diagnosis Modes

Mode	For start	Contents	For exit	Display
Input check mode	[0]+[3]+ [POWER]	Checks the status of input signals.	[POWER] OFF/ON	In
Output check mode	[0]+[4]+ [POWER]	Checks the status of output signals.	[POWER] OFF/ON	Ou
Test print mode	[0]+[7]+ [POWER]	Outputs the test patterns.	[POWER] OFF/ON	Pr
Adjustment mode	[0]+[5]+ [POWER]	Adjusts various items.	[POWER] OFF/ON	AJ
Setting mode	[0]+[8]+ [POWER]	Sets various items.	[POWER] OFF/ON	Ad
List print mode	[9]+[START] +[POWER]	Prints out the data lists of the codes 05/08 and pixel counter.	[POWER] OFF/ON	Lo
Access code mode	[8]+[START] +[POWER]	Registers / deletes the access code.	[POWER] OFF/ON	---
Function setting mode	[1]+[*]+ [POWER]	Sets the function table.	[POWER] OFF/ON	Fu
Test mode	[1]+[3]+ [POWER]	Checks the operation of the equipment.	[POWER] OFF/ON	Ch

Note:

To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0] and [5]) are pressed simultaneously.

*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.