Toshiba DP1610
Service Mode. How to Enter
Self-Diagnosis Modes
The self-diagnosis functions are used to make the settings for the various PPC functions. This document describes the self-diagnosis functions.
For the FAX functions, refer to the SERVICE HANDBOOK (GD-1061). For the method to enter each mode of the self-diagnosis functions, refer to the following chart.
| Mode | How to enter | Definition | How to clear |
|---|---|---|---|
| Country/Region code | Turn the power on while pressing the 0 and 2 keys. | Selects the country/region code. | *1 |
| Adjust mode | Turn the power on while pressing the 0 and 5 keys. | Finely adjusts copy image quality. Confirmation printing enabled by pressing the INTERRUPT key. | Turn the power off. |
| System mode | Turn the power on while pressing the 0 and 8 keys. | Performs setups for the system, maintenance, operations, printer, scanner, etc. | Turn the power off. |
| Scanner parking mode | Turn the power on while pressing the 0 and 9 keys. | Fixes the scanner carriage in place when transporting the copier. | Turn the power off. |
| RAM clear | Turn the power on while pressing the 1, 3, and * keys. | Clears values excluding the ones set in 08-446/447 and in the Adjust mode (05). | *2 |
| Service mode *3 | Press the PROGRAM key while REDAY is indicated, and then press the *, #, *, then * keys. | Performs setups for FUNCTION TEST and MAINTENANCE, and prints the Service List. | Press the PROGRAM key, and then press the *, #, *, then * keys. Or turn the power off. Or press the COPY key, or press the MAIN MENU key. *4 |
| FUNCTION TEST | After entering the service mode, select it on the screen. This mode is selected by turning the power on while pressing the 1 and 3 keys | Conducts OPE. PANEL TEST, PRINT TEST, MODEM TEST, etc. | |
| MAINTENANCE | After entering Service Mode, select it on the screen. | Performs setups for Memory Clear, facsimile function, etc. | |
| Service list | After entering Service Mode, select it on the screen. | Prints PROTOCOL TRACE, Total Error, FUNCTION LIST, etc. |
*1: After inputting the country/region code, the copier automatically enters the warm up mode.
*2: After the RAM clear, the machine automatically enters the warm up mode.
*3: In the SERVICE MODE, each function of the FUNCTION TEST, MAINTENANCE, or SERVICE LIST in each test item of the TEST MODE (displayed by pressing the PROGRAM key), are added. When the copier enters this mode, these functions are available.
*4 The copier enters into the service mode by pressing 1 and 3 keys while turning the power on. To exit from the service mode, turn the power off.