Sharp MXM450
Simulation mode. List of simulation codes 65 - 67
| Code | Function (Purpose) | |
|---|---|---|
| Main | Sub | |
| 65 | 1 | Used to adjust the touch panel (LCD display section) detection position. |
| 2 | Used to check the result of the touch panel (LCD display) detection position adjustment. (The coordinates are displayed.) | |
| 66 | 1 | Used to change and check the FAX soft switch functions. (Used to change and check the functions provided for the FAX soft switches.) (Only when FAX is installed) |
| 2 | Used to clear the FAX soft switch function data and to set to the default. (Excluding the adjustment values.) (Only when FAX is installed) | |
| 3 | Used to check the operation of the FAX PWB memory (read/write). (This adjustment is required when the PWB is replaced with a new one.) (Only when FAX is installed) | |
| 4 | Used to check the output operation of data signals in each data output mode of FAX. (Used to check the operation of MODEM. ) Send level: Max. (Only when FAX is installed) | |
| 5 | Used to check the output operation of data signals in each data output mode of FAX. (Used to check the operation of MODEM.) An output is sent at the send level set by the soft switch. (Only when FAX is installed) | |
| 6 | Used to print the confidential pass code. (Used when the confidential pass code is forgotten.) (Only when FAX is installed) |
|
| 7 | Used to print the image memory data (memory send/receive). (Only when FAX is installed) | |
| 8 | Used to check the output operation of various sound signals of FAX. (Used to check the operation of the sound output IC.) Send level: Max. (Only when FAX is installed) | |
| 9 | Used to check the output operation of various sound signals of FAX. (Used to check the operation of the sound output IC.) An output is sent at the send level set by the soft switch. (Only when FAX is installed) | |
| 10 | Used to clear all data of the image memory (memory send/receive). The confidential data are also cleared at the same time. (Only when FAX is installed) | |
| 11 | Used to check the output operation of FAX G3 mode 300bps. (Used to check the operation of MODEM.) Send level: Max. (Only when FAX is installed) | |
| 12 | Used to check the output operation of FAX G3 mode 300bps. (Used to check the operation of MODEM.) An output is send at the send level set by the soft switch. (Only when FAX is installed) | |
| 13 | Used to enter (set) the number of FAX dial signal output test. (The dial number set by this simulation is outputted when the dial signal output test is made by SIM 66-14 - 16. ) (Only when FAX is installed) | |
| 14 | Used to set the make time in the FAX pulse dial mode (10pps) and to test the dial signal output. (The dial number signal set by SIM 66-13 is outputted.) Used to check troubles in dialing and to check the operation. (Only when FAX is installed) | |
| 15 | Used to set the make time in the FAX pulse dial mode (20pps) and to test the dial signal output. (The dial number signal set by SIM 66-13 is outputted.) Used to check troubles in dialing and to check the operation. (Only when FAX is installed) | |
| 66 | 16 | Used to check the dial signal (DTMF) output in the FAX tone dial mode. (The dial number signal set by SIM 66-13 is outputted.) The send level can be set to an optional level. Used to check troubles in dialing and to check the operation. (Only when FAX is installed) |
| 17 | Used to check the dial signal (DTMF) output in the FAX tone dial mode. Send level: Max. Used to check the operation. (Only when FAX is installed) | |
| 18 | Used to check the dial signal (DTMF) output in the FAX tone dial mode. An output is sent at the send level set by the soft switch. Used to check the operation. (Only when FAX is installed) | |
| 19 | Used to back-up the HDD data into the Flash memory (optional FAX expansion memory: AR- MM9). (Only when FAX is installed) | |
| 20 | Used to read the back-up data by SIM 66-19 to the SRAM/HDD. (Only when FAX is installed) | |
| 21 | Used to print information related to FAX (various registrations, communication management, file management, system error protocol). (Only when FAX is installed) | |
| 22 | Used to adjust the handset volume. (Only when the FAX is installed.) | |
| 23 | Used to download the FAX program. (Only when FAX is installed) Not used in the market. (For development) |
|
| 24 | Used to clear the FAST memory data. (Only when FAX is installed) | |
| 25 | Used to register the FAX number for Modem dial- in. (Only when FAX is installed) Not used in the market. (For development) |
|
| 26 | Used to register external telephone numbers for Modem dial-in. (Only when FAX is installed) Not used in the market. (For development) |
|
| 27 | Used to register the transfer number for voice warp. (Only when FAX is installed) Not used in the market. (For development) |
|
| 29 | Used to clear data related to an address book (one-touch registration, program registration/ expansion, relay memory box registration, each table content). | |
| 30 | Used to check the change in the TEL/LIU status. (Only when FAX is installed) | |
| 31 | Used to check the relay operation. (Only when FAX is installed) |
|
| 32 | Used to check the receive data (fixed data) from the line. (Only when FAX is installed) | |
| 33 | Used to check the signal (BUSY TONE/CNG/CED/ FNET/DTMF) detection. (Only when FAX is installed) | |
| 34 | Used to measure the communication time of test image data. (Only when FAX is installed) | |
| 35 | Modem program rewriting. (Only when FAX is installed) Not used in the market. (For development) | |
| 36 | Used to check interface between MFPC controller and MDMC. (Check of the data line or the command line) (Only when FAX is installed) | |
| 39 | Used to set the destination specifications. (Only when FAX is installed) | |
| 42 | PIC program rewriting (Only when FAX is installed) | |
| 43 | PIC adjustment value writing (Only when FAX is installed) | |
| 67 | 16 | Used to check the operation of the network card. |