| Main |
Sub |
Functions |
Section |
| 30 |
1 |
Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. |
|
| 2 |
Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. |
|
| 30 |
Used to check the operation of the motion sensor. |
|
| 40 |
2 |
Manual paper feed tray paper width sensor adjustment. |
Paper feed |
| 7 |
Used to set the adjustment value of the manual paper feed tray paper width sensor. |
Paper feed |
| 12 |
Used to adjust the tray 4 width detection level. |
Paper feed |
| 41 |
1 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 2 |
Used to adjust the document size sensor detection level. |
|
| 3 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 43 |
1 |
Used to set the fusing temperature in each mode. |
|
| 2 |
Used to set the fusing operation and preheating. |
|
| 20 |
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 21 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 24 |
Used to set the correction of the temperature adjustment value of SIM 43-1. |
|
| 32 |
Used to set various items related to the forcible operation of web cleaning when job end. |
Fusing |
| 34 |
Used to check the fusing lower web cleaning motor operation. |
Fusing |
| 35 |
Fusing nip operation check |
Fusing |
| 44 |
1 |
Used to set each correction operation function in the image forming (process) section. |
Image process (Photo conductor/ Developing/Transfer/Cleaning) |
| 2 |
Used to adjust the light quantity adjustment of the process control computer sensor and groundwork reading. |
Process |
| 4 |
Used to set the conditions of the high density process control operation. |
Process |
| 6 |
Used to execute the high density process control forcibly. |
Process |
| 9 |
Used to display the result data of the high density process control operation. |
Image process (Photo conductor/ Developing/Transfer/Cleaning) |
| 12 |
Used to display the operation data of the high density process control and the image density sensor (registration sensor). |
Image process (Photo conductor/ Developing) |
| 14 |
Used to display the output level of the temperature and humidity sensor. |
Process (OPC drum, development)/Fusing/LSU |
| 15 |
Used to set the OPC drum idle rotation. |
Process |
| 17 |
Process refresh execution |
Process |
| 21 |
Used to set the halftone process control target. |
Process |
| 22 |
Used to display the toner patch density level in the halftone process control operation. |
Process |
| 24 |
Used to display the correction target and the correction level in the halftone process control operation. |
Process |
| 25 |
Used to set the calculating conditions of the correction value for the halftone process control. |
Process |
| 26 |
Used to execute the halftone process control compulsory. |
Process |
| 27 |
Used to clear the correction data of the halftone process control. |
Process |
| 28 |
Used to set the process control execution conditions. |
Process |
| 29 |
Used to set the operating conditions of the process control during a job. |
Process |
| 37 |
Used to set the development bias correction level in the continuous printing operation. |
|
| 43 |
Used to display the identification information of the developing unit. |
Developing system |
| 62 |
Used to set the process control execution conditions. |
Process |
| 46 |
2 |
Used to adjust the copy density in the copy mode.(Monochromatic copy) |
|
| 4 |
Used to adjust the density in the image send mode.(Color scanner) |
|
| 5 |
Used to adjust the density in the image send mode.(Monochromatic scanner) |
|
| 8 |
Used to adjust the image send mode color balance RGB. |
|
| 9 |
Used to adjust the scan image density. |
|
| 10 |
used to adjust the copy gray balance and gamma (for each copy mode) |
|
| 16 |
Used to perform the engine gray balance manual adjustment (monochrome, all modes). |
|
| 19 |
Used to set the monochrome auto exposure mode. |
|
| 23 |
Used to perform the half tone highest density correction. |
|
| 24 |
Used to perform the engine half tone auto density adjustment. |
|
| 32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode. |
|
| 37 |
Used to adjust the reproduction capability of monochrome mode color. |
|
| 39 |
Used to adjust the sharpness of FAX send images. |
|
| 40 |
Used to adjust the FAX send image density. (Collective adjustment of all the modes) |
|
| 41 |
Used to adjust the FAX send image density. (Normal) |
|
| 42 |
Used to adjust the FAX send image density. (Fine) |
|
| 43 |
Used to adjust the FAX send image density. (Super Fine) |
|
| 44 |
Used to adjust the FAX send image density. (Ultra fine) |
|
| 45 |
Used to adjust the FAX send image density. (600dpi). |
|
| 46 |
Used to adjust the FAX send image density. (RGB RIP) |
|
| 47 |
Used to set the compression rate of copy and scan images (JPEG). |
|
| 48 |
Used to set the copy output resolution setting.(Change 600DPI/1200DPI every picture mode.) |
|
| 51 |
Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. |
|
| 52 |
Used to set the gamma default for the copy mode heavy paper and the image process mode. (After execution of either SIM46-54 or SIM46-51, the adjustment value is reset to the initial value.) |
|
| 54 |
Used to perform the engine halftone automatic density adjustment (dither). |
|
| 55 |
Used to adjust the drop out color in the image send mode (monochrome manual text mode). |
|
| 58 |
Used to set the copy mode pseudo resolution. (Smoothing process) |
|
| 60 |
Used to adjust the sharpness in the color auto copy mode. |
|
| 61 |
Used to adjust the area separation recognition level. |
|
| 62 |
Used to set the operating conditions of the ACS, the area separation, the background image process, and the auto exposure mode. |
|
| 63 |
Used to adjust the density in the copy low density section. |
|
| 66 |
Used to adjust the reproduction capability of watermarks in the copy/printer mode. |
|
| 68 |
Used to adjust the automatic resolution judgment. |
|
| 74 |
Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) |
|
| 90 |
Used to set the process operation of high-compression PDF images. |
|
| 91 |
Used to adjust the reproduction capability of black text. |
|