Sharp MXM232DA

1. Entering the simulation mode

Perform the following procedure to enter the simulation mode.
[#] key → [*] key → [C] key → [*] key
Main code → [START] key → Sub code → [START] key

2. Canceling the simulation mode

When the [CA] key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the screen returns to the sub code entering display.

* After canceling the simulation mode, be sure to turn OFF/ON the power and check the operation.

Note:
If the machine is terminated by a jam error or paper empty during copying in the adjustment by the simulation, recopying is required.

Note:
The values in the simulation columns are not default values but sample values.