| Main |
Sub |
Function (Purpose) |
Section |
Purpose |
| 62 |
1 |
Used to format the hard disk. (Except for the operation manual area.) |
|
|
| 2 |
Used to check the read/write operation of the hard disk. (Partial section) |
|
Operation test/check |
| 3 |
Used to check the read/write operation of the hard disk. (All area) |
|
Operation test/check |
| 6 |
Used to perform the self diag of the hard disk. |
|
Operation test/check |
| 7 |
Used to print the self diag error log of the hard disk. |
|
Operation test/check |
| 8 |
Used to format the hard disk. (Except for the system area and the operation manual area.) |
|
|
| 10 |
Used to delete the job log data. |
|
Data clear |
| 11 |
Used to delete the document filing data. |
|
Data clear |
| 12 |
Used to set YES/NO of auto format in hard disk trouble. |
|
Setting |
| 13 |
Used to format the hard disk.(Operation manual area only). |
|
|
| 63 |
1 |
Used to check the result of the shading correction. |
|
Adjustment/ Setting/ Operation data check |
| 2 |
Used to execute shading forcibly. |
Scanner |
Adjustment/ Setting |
| 3 |
Used to perform the gamma correction and density conversion for RGB data inputted from the CCD. The gamma correction 1 of the SCAN ASIC and the set value of color correction are calculated and set from the specified image data. |
Scanner |
Adjustment/ Setting |
| 4 |
The average value of the patch scan values for the RGB image data inputted from the CCD are calculated and displayed. |
Scanner |
Adjustment/ Setting |
| 5 |
Used to reset the color balance of the scanner to the default. |
|
Adjustment/ Setting |
| 6 |
Used to set the auto adjustment pattern of the engine and color balance. |
|
Adjustment/ Setting |
| 7 |
Used to set the auto density of the engine auto adjustment scanner target value. (Service) |
|
Adjustment/ Setting |
| 8 |
Used to reset the engine auto adjustment scanner target value to the default value. |
|
Adjustment/ Setting |
| 64 |
2 |
Self print (B/W mode) |
|
Operation test / check |
| 3 |
Self print (B/W mode: high speed process) |
|
Operation test/check |
| 4 |
Used to make the self print of the printer. |
|
Operation test/check |
| 5 |
Printer self print (PCL) |
|
Operation test/check |
| 6 |
Printer self print (PS) |
|
Operation test/check |
| 65 |
1 |
Used to adjust the detection position of the touch panel (LCD display section). |
Operation panel section |
Adjustment |
| 2 |
Used to check the result of the touch panel (LCD display section) detection position adjustment. |
Operation panel section |
Operation check/Test |
| 5 |
Used to check the key input of the operation panel. |
Operation panel section |
Operation check/Test |
| 66 |
1 |
Used to change and check the soft switch setting. |
|
Setting |
| 2 |
Used to clear the soft switch and set the default value. |
FAX |
Data clear |
| 3 |
Used to check the operation (read/write) of the FAX PWB memory. |
FAX |
Operation test, check |
| 4 |
Used to check the output operation (MODEM operation) of data signal in each data output mode of FAX. Send level: MAX |
FAX |
Operation test, check |
| 5 |
Used to check the output operation of data signal in each data output mode of FAX(MODEM operation). Send level: Soft switch setting |
FAX |
Operation test, check |
| 6 |
Used to print the confidential pass code. |
FAX |
User data output, check |
| 7 |
Used to output the image memory data (memory send and receive).* The confidential receive contents are also outputted. |
FAX |
User data output, check |
| 8 |
Used to check the output operation (audio output IC operation check) of the various audio signals of FAX. Send level: MAX |
FAX |
Operation test, check |
| 9 |
Used to check the output operation of various audio signals of FAX (audio output IC operation). Send level: Soft switch setting |
FAX |
Operation test, check |
| 10 |
Used to clear all the data (memory receive and send) of the image memory.* The confidential receive data are cleared simultaneously. |
FAX |
Data clear |
| 11 |
Used to check the output operation in the FAX G3 mode 300bps (MODEM operation). Send level: MAX |
FAX |
Operation test, check |
| 12 |
Used to check the output operation (MODEM operation) in the FAX G3 mode 300bps. Send level: Set with the soft switch. |
FAX |
Operation test, check |
| 13 |
Used to set the number for the FAX dial signal output test. (In the dial signal output test with Sim. 66-14 - 16, the dial number set with this simulation is outputted.) |
FAX |
Setting |
| 14 |
Used to set the make time in the FAX pulse dial mode (10PPS) and to execute the dial signal output test. (The signal of the dial number set with Sim. 66-13 is outputted.) |
FAX |
Setting/Operation test, check |
| 15 |
Used to set the make time in the FAX pulse dial mode (20PPS) and to execute the dial signal output test. (The signal of the dial number set with Sim. 66-13 is outputted.) |
FAX |
Setting/Operation test, check |
| 16 |
Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. (The signal of the dial number set with Sim. 66-13 is outputted.) The send level can be set to an optional level. |
FAX |
Setting/Operation test, check |
| 17 |
Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. Send level: MAX |
FAX |
Operation test, check |
| 18 |
Used to perform the dial signal (DTMF) output test in the FAX tone dial mode. Send level: Set with the soft switch. |
FAX |
Operation test, check |
| 21 |
Used to print information abut FAX (various registrations, communication management, file management, system errors, protocols). |
FAX |
Adjustment, setting, operation data check |
| 22 |
Used to adjust the handset sound volume |
|
Adjustment/ Setting |
| 24 |
Used to clear the FAST memory data. |
FAX |
Clear |
| 25 |
Used to register a FAX number for MODEM dial-in. |
FAX |
Setting |
| 26 |
Used to register an external telephone number for MODEM dial-in. |
FAX |
Setting |
| 66 |
29 |
Used to clear the data related to the address book (one-touch registration, FTP/ Desktop extension, group extension, program registration, interface memory box, meta data, Inbound Routing, Document Admin table). |
|
Data clear |
| 30 |
Used to check a change in the TEL/LIU status. |
FAX |
Operation test, check |
| 31 |
Used to set the TEL/LIU output port. |
FAX |
Operation check |
| 32 |
Used to check the received data (fixed data) from the line. |
FAX |
Operation test, check |
| 33 |
Used to detect the line signals (BUSY TONE/CNG/CED/FNET/DTMF). |
FAX |
Operation test, check |
| 34 |
Used to measure the communication time of the send test image data. |
FAX |
Operation test, check |
| 36 |
Used to perform the interface check between the MFP controller and the MDMC. (Data line or command line check) |
FAX |
Operation test, check |
| 39 |
Used to set the destination. |
FAX |
Setting |
| 42 |
Used to rewrite the power control program again to the FAX BOX. |
FAX |
Setting |
| 43 |
Used to write the adjustment value of the power control program to the FAX BOX. |
FAX |
Setting |
| 60 |
Used to register the ACR data. When calling, the carrier prefix is added to the dial number to provide the auto select function of low-price line to the user. * To use this simulation, the FAX soft SW 24-4 and 24-5 must be set to [FUNCTION ON] and [Register Enable]. |
|
Adjustment/ Setting |
| 67 |
24 |
Used to set for auto color calibration. For FIERY option support, Sim is not displayed. |
|
Adjustment/ Setting |
| 25 |
Used to set the printer engine color balance manual correction. For FIERY option support, the Sim is not displayed. |
|
Adjustment/ Setting |
| 27 |
Used to register the scanner target value of the printer engine auto density adjustment. For FIERY option support, this Sim is not displayed. |
|
Adjustment/ Setting |
| 28 |
Used to reset the printer engine auto adjustment scanner target value to the default value. |
|
Adjustment/ Setting |
| 31 |
Used to clear the printer calibration value. For FIERY option support, the Sim is not displayed. |
|
Data clear |
| 32 |
Printer screen gamma table setting (300/600DPI). When supporting the FIERY option, Sim is not displayed. |
|
Adjustment/ Setting |
| 33 |
Used to perform the gamma correction of printer screens (for PCL). For FIERY option support, the Sim is not displayed. |
|
Adjustment/ Setting |
| 34 |
Used to set Enable/Disable of the printer half-tone max. density correction. |
|
Adjustment/ Setting |