Sharp MXC382SC
Simulation mode. Codes Color model 23-40
| Main | Sub | Functions | Section |
|---|---|---|---|
| 23 | 2 | Used to output the trouble history list of paper jam and mis-feed. (If the number of troubles of mis-feed is considerably great, the judgment is made that repair is required.) |
|
| 80 | Used to check the operation of paper feed and paper transport in the paper feed section and the paper transport section. Used to output the list of the operation status of the sensor and the detectors in the paper feed section and the paper transport section. | Paper feed, Paper transport | |
| 24 | 1 | Used to clear the jam counter, and the trouble counter. (After completion of maintenance, clear the counters.) | |
| 2 | Used to clear the number of use (the number of prints) of each paper feed section. | ||
| 3 | Used to clear the finisher, DSPF, and the scan (reading) unit counter. | ||
| 4 | Used to clear the maintenance counter, the printer counters of the transport unit and the fusing unit. (After completion of maintenance, clear the counters.) | ||
| 5 | Used to clear the developer counter. (After replacement of developer, clear the counter.) | ||
| 6 | Used to clear the copy counter. | ||
| 7 | Used to clear the OPC drum counter. (After replacement of the OPC drum, clear the counter.) | ||
| 9 | Used clear the printer mode print counter and the self print mode print counter. | ||
| 10 | Used to clear the FAX counter. (Only when FAX is installed) | ||
| 15 | Used to clear the counters related to the scan mode and the image send. | ||
| 30 | Used to initialize the administrator password. | ||
| 31 | Used to initialize the service mode password. | ||
| 25 | 1 | Used to check the operations of the developing section. | Process (Developing section) |
| 2 | Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) | Image process (Photo-conductor/Developing/ Transfer/Cleaning) |
|
| 26 | 2 | Used to set the paper weight type. | Paper feed |
| 3 | Used to set the specifications of the auditor. (Setting must be made according to the auditor use conditions.) | Auditor | |
| 6 | Used to set the specifications (paper, fixed magnification ratio, etc.) of the destination. | ||
| 10 | Used to set the trial mode of the network scanner. | ||
| 18 | Used to set Disable/Enable of the toner save mode operation. (For the Japan and the UK versions.) | ||
| 30 | Used to set the operation mode corresponding to the CE mark (Europe safety standards). (For slow start to drive the fusing heater lamp) | ||
| 32 | Used to set display or non-display of the system setting menu. | ||
| 35 | Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes: display as one trouble and display as several series of troubles. | ||
| 38 | Used to set Continue/Stop of print when the maintenance life is reached. | ||
| 41 | Used to set Enable/Disable of the magnification ratio automatic select function (AMS) in the center binding mode. | ||
| 49 | Used to set the print speed of postcards mode. | ||
| 50 | Used to set functions. | ||
| 52 | Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. | ||
| 53 | User auto color calibration (color balance adjustment) Inhibit/Allow setting (copy mode). (Color model) | ||
| 54 | User auto color calibration (color balance adjustment) Inhibit/Allow setting (printer mode). (Color model) | ||
| 55 | Used to set Enable/Disable of the automatic color calibration (automatic color balance adjustment) when replacing a consumable part. (Only color model) | ||
| 65 | Used to set the staple process restriction. | ||
| 69 | Used to set the operating conditions for toner near end. | ||
| 73 | Used to adjust the image loss (shade delete amount) in the name card copy mode. | ||
| 74 | Used to set the OSA trial mode. | ||
| 78 | Used to set the password of the remote operation panel. | ||
| 27 | 1 | Used to set non-detection of communication error (U7-00) with RIC. (FSS function) | |
| 2 | Used to set the sender's registration number and the HOST server telephone number. (FSS function) | ||
| 4 | Used to set the initial call and toner order auto send. (FSS function) | ||
| 5 | Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) | Communication (RIC/MODEM) | |
| 6 | Used to set of the manual service call. (FSS function) | ||
| 7 | Used to set of the enable, alert call out. (FSS function) | ||
| 9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | ||
| 10 | Used to clear the trouble prediction history information. (FSS function) | ||
| 11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | ||
| 12 | Used to check the high-density, half-tone process control and the automatic registration adjustment error history. (FSS Function) | ||
| 13 | Used to check the history of paper transport time between sensors. (FSS function) | ||
| 14 | Used to set the FSS function connection test mode. | ||
| 30 | 1 | Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. | |
| 2 | Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. | ||
| 33 | 2 | Used to delete the ID (IDM) information of Felica card. | |
| 40 | 2 | Manual paper feed tray paper width sensor adjustment. | Paper feed |
| 7 | Used to set the adjustment value of the manual paper feed tray paper width sensor. | Paper feed |