Main |
Sub |
Functions |
Section |
43 |
1 |
Used to set the fusing reference temperature of each operation mode. |
|
4 |
Used to set the fusing temperature 2 in each mode. (Continued from SIM 43-1.) |
|
20 |
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
21 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
22 |
Used to set the environment correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
23 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
24 |
Used to set the correction of the temperature adjustment value of SIM 43-1 and 43-4. |
|
44 |
1 |
Used to set each correction operation function in the image forming (process) section. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
2 |
Used to adjust the sensitivity of the image density sensor (registration sensor). |
Process |
4 |
Used to set the conditions of the high density process control operation. |
Process |
6 |
Used to execute the high density process control forcibly. |
Process |
9 |
Used to display the result data of the high density process control operation. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
12 |
Used to display the operation data of the high density process control and the image density sensor (registration sensor). |
Image process (Photoconductor/ Developing) |
13 |
Used to perform the color image sensor (image registration sensor F) calibration. |
|
14 |
Used to display the output level of the temperature and humidity sensor. |
Process (OPC drum, development)/Fusing/LSU |
16 |
Used to display the toner density control data. |
Developing system |
21 |
Used to set the half tone process control target. |
Process |
22 |
Used to display the toner patch density level in the half tone process control operation. |
Process |
24 |
Used to display the correction target and the correction level in the half tone process control operation. |
Process |
25 |
Used to set the calculating conditions of the correction value for the half tone process control. |
Process |
26 |
Used to execute the half tone process control compulsorily. |
Process |
27 |
Used to clear the correction data of the half tone process control. |
Process |
28 |
Used to set the process control execution conditions. |
Process |
29 |
Used to set the operating conditions of the process control during a job. |
Process |
31 |
Used to adjust the OPC drum phase. (Manual adjustment) |
Process |
37 |
Used to set the development bias correction level in the continuous printing operation. |
|
43 |
Used to display the identification information of the developing unit. |
Developing system |
61 |
Used to set the calibration data of the color image sensor (image registration sensor F). |
|
46 |
1 |
Used to adjust the copy density in the copy mode. |
|
2 |
Used to adjust the copy density in the copy mode. |
|
4 |
Used to adjust the density in the image send mode. |
|
5 |
Used to adjust the density in the image send mode. |
|
8 |
Used to adjust the image send mode color balance RGB. |
|
9 |
Used to adjust the scan image density. |
|
10 |
Used to adjust the copy color balance and the gamma (for each color copy mode). |
|
16 |
Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode). |
|
19 |
Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents. |
|
21 |
Copy color balance adjustment (Manual adjustment) |
|
23 |
Used to set the density correction of copy high density section (High density tone gap supported). |
|
24 |
Copy color balance adjustment (Auto adjustment) |
|
25 |
Used to adjust the copy color balance. (Single color copy mode) |
|
26 |
Used to reset the single color mode color balance set value to the default. |
|
27 |
Used to adjust the gamma/density of copy images, texts, and line image edges. |
|
30 |
Used to adjust the resolution in the sub scanning direction in the copy mode. |
|
32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode. |
|
36 |
Used to adjust the colors in the 2-color copy mode. |
|
37 |
Used to adjust the color document reproducibility in the monochrome copy mode. |
|
38 |
Used to adjust the black component amount in the color copy mode. |
|
39 |
Used to adjust the sharpness of FAX send images. |
|
40 |
Used to adjust the FAX send image density. (Collective adjustment of all the modes) |
|
41 |
Used to adjust the FAX send image density. (Normal) |
|
42 |
Used to adjust the FAX send image density. (Fine) |
|
43 |
Used to adjust the FAX send image density. (Super Fine) |
|