Sharp MXB355WZ
Simulation mode. List of classic mode. Codes 46-52 - 65-5
| Sim No. | Function | Installation | Maintenance | Adjustment and Settings |
|---|---|---|---|---|
| 46-52 | Set gamma default value of heavy paper mode and image process mode in the copy mode | 1-3 | ||
| 46-54 | Adjust the engine halftone auto density (dither) | 1-3 | ||
| 46-55 | Adjust the dropout color in the image send mode | |||
| 46-58 | Set pseudo resolution in the copy mode | |||
| 46-60 | Set the sharpness in auto mode | |||
| 46-61 | Set the area separation recognition level | |||
| 46-62 | Set the operating condition of the auto color selection, the area separation, the background image process and the auto exposure mode | |||
| 46-63 | Adjust the density in the copy low density | |||
| area | ||||
| 46-66 | Adjust the reproduction capability of watermark in the copy/printer mode | |||
| 46-68 | Adjust the auto resolution judgement | |||
| 46-74 | Adjust copy gray balance (auto) / printer | 1-1 | 2-2 | 1-2 |
| gray balance (auto) | 1-5 | 2-3 | 1-3 2 |
|
| 46-90 | Set the process operation of high compression PDF image | |||
| 46-91 | Adjust the reproduction capability of black text | |||
| 48-1 | Adjust the scan image magnification ratio (main scanning direction and sub scanning direction) | 1-1 | ||
| 48-5 | Adjust the scan image magnification ratio (sub scanning direction) | 1-1 | ||
| 48-6 | Adjust the rotation speed of each motor | |||
| 49-1 | Update the firmware | 4 | 5 | |
| 49-7 | Update the preinstalled firmware | 4 | 5 | |
| 50-1 | Adjust the copy image position and the image loss | 1-1 | ||
| 50-5 | Adjust the printer image position and the image loss | 1-1 | ||
| 50-6 | Adjust SPF image position and the image loss | 1-1 | ||
| 50-10 | Adjust the image position in the each paper feed tray | 1-2 | 2-1 | 1-1 |
| 50-12 | Adjust the scan image off center position | 1-1 | ||
| 50-27 | Adjust the scan image loss in the FAX and image send mode | |||
| 51-1 | Set the transfer voltage timing | |||
| 51-2 | Adjust the contact pressure on paper by the main unit and the SPF resist roller | |||
| 53-8 | Adjust the document lead edge and the scan position | 3 | ||
| 53-9 | Set the dirt detection and scan position | |||
| 53-10 | Execute SPF dirt detection | |||
| 55-1 | Set the specification of the engine operation | |||
| 55-2 | Set the specification of the scanner operation | |||
| 55-3 | Set the specification of the controller operation | |||
| 55-10 | Used to set the special stamp text for Taiwan |
|||
| 56-1 | Transport data between EEPROM and STORAGE | |||
| 56-2 | Backup the data in the EEPROM and STORAGE to the USB memory | |||
| 56-3 | Backup the document filing data to the USB memory |
|||
| 56-4 | Backup the job log data to the USB memory | |||
| 56-5 | Backup the SIM22-6 data in the text format to the USB memory | |||
| 56-6 | Backup the SIM23-2 data in the text format to the USB memory | |||
| 56-7 | Backup the syslog data to the USB memory | |||
| 56-15 | Restore the data to MFP EEPROM | |||
| 56-99 | Backup all log data to the USB memory | 3-4 | 1-5 | 9-4 |
| 60-1 | Check read/write memory operation | |||
| 61-1 | Check the LSU polygon motor rotation and laser detection | |||
| 61-3 | Set the laser power | |||
| 61-14 | Set the laser power correction | 1-3 | ||
| 62-1 | Format the storage | |||
| 62-3 | Check read/write the STORAGE (all areas) | |||
| 62-4 | Check the format of the STORAGE (Logical) | |||
| 62-7 | Print the STORAGE self diagnostics error log | |||
| 62-9 | STORAGE data clear | |||
| 62-12 | Set auto format in STORAGE error | |||
| 62-14 | Check/Delete the database file in the STORAGE |
|||
| 62-21 | Display the storage information in the STORAGE | |||
| 63-1 | Check shading correction data | |||
| 63-2 | Execute shading correction | 1-5 | 3 | |
| 63-3 | Adjust scanner (CCD) color balance and gamma correction | 1-5 | 2-3 | 3 |
| 63-4 | Check the scanner test chart patch density | |||
| 63-5 | Reset the scanner (CCD) color balance and gamma correction | 2-3 | 3 | |
| 63-11 | Set gray balance target in the copy mode | 5 | ||
| 64-2 | Test print | 8 | ||
| 64-4 | Printer test print | |||
| 64-5 | Printer test print (PCL) | 1-4 | ||
| 64-6 | Printer test print (PS) | |||
| 65-1 | Adjust the touch panel detection coordinate | 7 | ||
| 65-2 | Check the touch panel detection coordinate | |||
| 65-5 | Check the operation panel key input |